1 / 8
Raspberry Pi Microscope WIP -- (Remix of BraunsCNC's designs) — image 1
1 / 8

Raspberry Pi Microscope WIP -- (Remix of BraunsCNC's designs)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Remix of BraunsCNC's model with update for Rasp Pi camera V2.1 with Rasp Pi Zero or Rasp Pi 4. **See update list.**

Rating
0 / 5
Likes
25
Downloads
182
Makes
0
Views
1,731
Reviews
0

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Attribution — Noncommercial — Share Alike

I really enjoyed this awesome design from BraunsCNC but I wanted to make some modifications for the Raspberry Pi 4 and less restriction on purchasing manufactured components vs. printing them. 

Unfortunately, this project doesn't have parametric modeling since it was before I had learned how to use parametric modeling.

I made the models for 3 mm brass inserts which allow for a clean overall look.  The linear rod is designed for a 12mm linear rod.  

The camera mount has been adjusted to fit a Raspberry Pi camera ver 2.1 and allows room for the component to fit well into the grooves. So far, I have not tested it with a NoIR camera since I don't have one but would like to work on that when I aquire a NoIR camera. 

Raspberry Pi Bracket

I added a bracket to allow use with a Raspberry Pi Zero or Raspberry Pi 4. I am still playing around with the bracket but it has worked so far on my testing. The bracket can be attached using ~ 6 mm screws.

BOM

Pending

 

 

Print Instructions

Rafts: None

Supports: None

Resolution: Personal preference, I used 0.20mm layer heights

Infill: Personal preference, I used 15-20%

Play around with your slicer and orient the models to reduce overhangs and you should not have to worry about supports.

 

Updates:

2-18-24

  • Removed files labeled as “Large," unsure if this was an error with Printables updating the server.
  • Renamed models and organized files into folders.

Future Plans:

  • Add BOM spreadsheet, including required hardware.
  • Add video showing how to assemble the project.
  • Find a program to use microscope for viewing sample.
  • Add .3mf file for build plate with all parts oriented.
  • Update project to a new version.
    • 2020 extrusion for vertical shaft
    • Fix tolerances on mounts so camera stays in fixed position rather than falling closer to base stage.  
    • Add new version with STEP file.

Tags