ANL Fuse holder block
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
ANL Fuse holder blocks for one or multiple fuses
- Rating
- 0 / 5
- Likes
- 25
- Downloads
- 184
- Makes
- 0
- Views
- 1,131
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
ANL Fuse holder blocks for one or multiple fuses with single input. One side of fuses is tied together. If you don't want inputs to be tied together, you can use negative volume in slicer and remove part that surrounds busbar and just use nuts there. Keep in mind that you will need more nuts in that case. Designed to be printed without any supports. Print with ABS or ASA if you plan on using this in your car. I've had mine for 3 years under hood and i don't see any issues, printed with AzureFilm ABS+.
Use M8 screws that are at least 30mm long.
Single ANL holder doesn't require busbar, rest of them need 5x20mm copper busbar, length depends on fuse holder. You can use 3.5mm screws for mounting.
1x model - 2 M8 screws and 4 nuts
2x model - 60mm busbar - 4 M8 screws and 6 nuts
4x model - 120mm busbar - 8 M8 screws and 12 nuts
5x model - 150mm busbar - 10 M8 screws and 15 nuts
6x model - 180mm busbar - 12 M8 screws and 18 nuts