1 / 5
GoPro mount for racecar
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a mount for a GoPro which can be connected to the roll cage.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 5
- Makes
- 0
- Views
- 41
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution
A friend of mine races in a Citroen C1 with a roll cage in it (Pro racing) and he needed a proper mount for his GoPro.
Since it needed to be sturdy i decided to make it a block so it would not be too much filament usage but still plenty of strong to be used. On the top i made a M8 hole so you can add a rod there for extra strength. On the left side there are 2 holes for M6 rods also for extra strength.
I printed this in ASA with 5 walls (0.4 nozzle) and about 50% 3d honeycomb infill.