1 / 1
Velotric Summit 8mm Tail Light Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This will allow you to use a seat with an 8mm frame
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 10
- Makes
- 0
- Views
- 85
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
After replacing the seat on my Velotric Summit I discovered the new seat was 8mm vs the stock that was 7mm. This was enough that the stock tail light mount wasn't going to work. I designed this which is pretty close to identical to the stock mount (all the important parts anyway) but will allow you to mount a Velotric tail light on a seat with an 8mm frame instead of the stock 7mm. I would print the arms solid. Use m3 screws for the clamps.