1 / 1
Penguins Hockey Puck - textured, official size — image 1

Penguins Hockey Puck - textured, official size

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

I've seen an old 1970 Penguins logo on a puck but wanted to update one here. Logo is on the bottom of 3D model here.

Rating
0 / 5
Likes
1
Downloads
26
Makes
0
Views
86
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

This is an official sized, textured hockey puck with the Pittsburgh Penguins* current team logo on it. I created it as a collectible item for my son to display in his trophy case. *** This is NOT to be used as a real hockey puck. ***

I also added my son's name and hockey number in the photo, but removed it for the uploaded files here. If you would like to add your own text, please refer to many videos on YouTube and use the provided *.f3d file if you are using Fusion360. 

This print can take a while depending on your print settings due to the circular motion each layer has to make. 

 

Print Instructions: printed on Ender 3 v3-SE (Cura slicer)

+ Standard printer settings will work with this file.

        Filament: PLA (other filaments will work with this puck, but PLA is what I had on hand)

        Nozzle: 0.4mm

        Layer Height: I used 0.2mm (you may get finer details and a longer print time with 0.16mm or less)

        Infill: 15% (personal preference)

        Temperature/Material: dependent on filament recommendations

        Supports: No

        Build Plate Adhesion: Skirt

        Model Orientation: Print with logo facing up.

        G-code Modifications: 

                Filament Change 1 - from black to yellow which is cut into the puck for 3 layers (0.6mm).

                Filament Change 2: from yellow to black, kept this layer level with the top surface and down 3 layers (0.6mm) from the top.

                Filament Change 3 - from black to white, this layer was extruded 3 layers (0.6mm)  over the top surface of the overall puck.

        Post-Processing: None, I cleaned up a fray or two off the top surface. Don't mind how poor the top few layers look, it's not a design problem, it's me lol

 

*I am not an affiliate with the Pittsburgh Penguins

*** disclaimer

 

Tags