1 / 4
Fist Bump - magnetic sweatshirt beads — image 1
1 / 4

Fist Bump - magnetic sweatshirt beads

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

These are simple beads in the shape of fists with small magnets that bring them together for an ultimate fist bump.

Rating
0 / 5
Likes
7
Downloads
36
Makes
0
Views
154
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

Everyone loves a fist bump, and with these magnetized fists you'll be seeing a lot of fist bumps. This was a simple remix of a fist, adapted to be a bead of a sweatshirt or other string. I then glued a 4mm (diameter) x 2mm (height) magnet to each fist, which really brought this project together. This print is very simple and does not require supports. 

 

Print Instructions: printed on Ender 3 v3-SE (Cura slicer)

+ Standard printer settings will work with this file.

        Filament: PLA (other filaments will work with these, but PLA is what I had on hand)

        Nozzle: 0.4mm

        Layer Height: I used 0.2mm (you may get finer details and a longer print time with 0.16mm or less)

        Infill: 10% (personal preference)

        Temperature/Material: dependent on filament recommendations

        Supports: No

        Build Plate Adhesion: Skirt

        Model Orientation: Print with flat part of wrist on the print bed.

        G-code Modifications: None

        Post-Processing: None

Tags