1 / 4
Fist Bump - magnetic sweatshirt beads — zdjęcie 1
1 / 4

Fist Bump - magnetic sweatshirt beads

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

These are simple beads in the shape of fists with small magnets that bring them together for an ultimate fist bump.

Ocena
0 / 5
Polubienia
7
Pobrania
36
Wydruki
0
Wyświetlenia
153
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Everyone loves a fist bump, and with these magnetized fists you'll be seeing a lot of fist bumps. This was a simple remix of a fist, adapted to be a bead of a sweatshirt or other string. I then glued a 4mm (diameter) x 2mm (height) magnet to each fist, which really brought this project together. This print is very simple and does not require supports. 

 

Print Instructions: printed on Ender 3 v3-SE (Cura slicer)

+ Standard printer settings will work with this file.

        Filament: PLA (other filaments will work with these, but PLA is what I had on hand)

        Nozzle: 0.4mm

        Layer Height: I used 0.2mm (you may get finer details and a longer print time with 0.16mm or less)

        Infill: 10% (personal preference)

        Temperature/Material: dependent on filament recommendations

        Supports: No

        Build Plate Adhesion: Skirt

        Model Orientation: Print with flat part of wrist on the print bed.

        G-code Modifications: None

        Post-Processing: None

Tagi