MagTag case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Case for the MagTag that I'm using for my MagTag ISS Tracker project.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 25
- Makes
- 0
- Views
- 274
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Share Alike
Case for my MagTag ISS Tracker project. CircuitPython source can be found at https://github.com/apendley/magtag-iss-tracker.
I printed both pieces face-down with no supports, using 15% infill. I used Polymaker Pro silver filament for a retro space-agey prototype feel.
Fasten the front cover to the MagTag with 4 M3x6mm screws. I used black nylon screws for aesthetic reasons, but any type of screws will do.
For assembling the back cover, there are three options:
- Fasten back cover to MagTag with 4 M3x6mm screws for a free-standing build
- Fasten back cover to MagTag with magnetic feet to enable mounting on metal surfaces, such as refrigerators, etc.
- Fasten back cover to MagTag along with Skadis hooks from https://www.printables.com/model/86615-magtag-support-on-skadis using M3x10mm screws to enable mounting on Ikea Skadis peg boards.
TIP: If using a lighter colored filament, to prevent light bleed from the LEDs through the front cover, put some black masking/gaffers/electrical tape on the inside of the cover right above where the LEDs on the MagTag are positioned when mounted.
