Balled Corner Protector w/ Flat Bottom
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Corner protector for flat surfaces like tables, shelves etc. Remix of "Balled Corner Bumper Guard" of feedme3d
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 11
- Makes
- 0
- Views
- 68
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Share Alike
Dimensions
Size: 39x39x36.5 mm^3
Sphere diameter: 35 mm
Covers 30 mm of the corner in all axis
—Tested for Crealty K1 Max w/ standard 0.24mm profile—
Filament: Generic ABS—For impact resistance ABS is superior to PLA.
Layer Height: 0.24 mm—For max speed; use lower setting for higher fidelity.
Wall loops: 2 to 4—2 for softer outer shell and 4 for high impact resistance.
Infill: 15 to 40—15 for better cushioning and 40 for high impact resistance.
Infill Pattern: Cubic
Time: 11 to 15 min
Material: 2.2 m / 6.5 g to 3.4 m / 10 g