Philips Oneblade Wall Mount and Charging Station - Easy and Fast Print with 3 new options!
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple wall mountable storage solution for Philips Oneblade and accessories.
- Rating
- 4.333 / 5
- Likes
- 207
- Downloads
- 537
- Makes
- 3
- Views
- 3,545
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
General:
This stand fits 3 replacement blades, and 2 combs.
The body pocket is based on my 3d scan of the oneblade, then offset .5mm so it fits perfectly. There is a hole at the bottom of the pocket for charging.
Why I designed this:
I designed this to help clean up my small bathroom counter and keep my blades safe from damage.
Printing notes:
- Layer height: .15 or finer is ideal
- Recommended Material: PLA or better
- Supports: None
- Infill: 15% Gyroid or triangle
- Walls: 2-3
- Other Modifiers: Print as oriented
- Material Quantity: ≈50grams
I printed from PC on Qidi plus4 at .15 layer height with 15% gyroid infill.
Cautions and updates:
Don't overtighten the screws in a stud, or it will crack the mounting tabs.
_____________________________________________________________________________________________________________
Don’t forget to follow me, post a make, leave a like, or tell me what you don’t like so I can make improvements.
Thanks, and Happy Printing!
Also Check out:
For a more comprehensive wall mount, check out my larger version: https://www.printables.com/model/1317123-easy-mount-easy-print-philips-oneblade-wall-mount/files
The other version has better fitting pockets and more of them for a wider range of accessories.
You might also like my new extension handle for the oneblade: https://www.printables.com/model/1317332-philips-oneblade-extension-handleback-shaverbeta