IBM Selectric I retrofit ribbon spool.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Takeup spool allowing 71 selectric ribbon to somewhat work on 72.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 10
- Makes
- 0
- Views
- 90
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial
I invariably ordered the wrong spool for my model of selectric, leaving me with a takeup spool that wouldn't even sit on the carriage. So I designed a similar empty spool that would work with the arbor of the selectric's other side. This is an extremely basic stab at a solution that is more or less working for me, if you're in the same jam you can use this model to get some life out of a useless ribbon. Just use some tape or the stick of your existing ribbon lead and give it a few turns to secure it.
Note that the outer diameter of the spool was decreased after the iteration I took photos of to limit the interference between sides of a fresh ribbon.