1 / 9
Zubax Myxa ESC Case and 16mm tube mount — image 1
1 / 9

Zubax Myxa ESC Case and 16mm tube mount

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

That's right! Your favourite ESC now has an easy to modify and use 3D Printed Case.

Rating
0 / 5
Likes
0
Downloads
15
Makes
0
Views
64
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

Le sommaire
I’ve put together a sleek, lightweight, and wildly modifiable case for your Myxas. The goal? Fix some of the problems I found with the old design:

Mounting – It now supports 16 mm tube clamps directly.

Customization – You get a .step file that’s super tweakable to suit whatever weird setup you’ve got going on.

ESC ID marking – A label slot is built right into the top case. Mine just says “ESC 001” for now, but feel free to mark it with the DroneCAN (Cyphal) node ID, or prop direction.

Hardware
Now, fair warning: you will need screws. No clips, no glue—just good old-fashioned M2 hardware (three of them) to hold the case together. For the 16 mm tube mount setup, you’ll want M3 screws to fix the mount to the case.
Suggested order of operations:

Screw the bottom case to the mount using M3s.

Drop the Myxa into place.

Close it all up with M2 screws.

Tying it all together
Crack open the .step file (or the .f3d version) and tweak to your heart’s content.

Pro tip:
Before printing, update the label to match your ESC number—or better yet, include the prop spin direction. Then hit print. While the printer’s cooking, go snag some M2 and M3 screws from the hardware store and pretend you're doing something incredibly important.

 

Revision 3.0

(This model was posted on Revision 2.0 - so no I'm not updating it that fast)

  • Added in the ESC Number text and Propeller Direction text
  • Slightly better cooling
  • Thinner profile
  • Removed unnecessary text for CAN1 and AUX. (Feel free to add them back)
  • Made it easier to print with posts
  • Added in the models for the ESC 001, 002, 003 and 004 covers. They've all got standard Propeller direction markings on them (Ardupilot and PX4 standard)
  • Added some fillets and chamfers to improve strength.

You're welcome.

Tags