1 / 5
BSH 00646776 removable condenser door / Wartungsklappe Wäschetrockner — image 1
1 / 5

BSH 00646776 removable condenser door / Wartungsklappe Wäschetrockner

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Removable condenser door for tumble dyers by Bosch, Siemens, Gaggenau, Constructa and Balay.

Rating
5 / 5
Likes
10
Downloads
83
Makes
1
Views
468
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Since my tumble dryer needed a deep cleaning, I also had to clean the condenser and heat exchanger. I looked online and realized that I could 3D print the part myself. I based it on a model made by Lada and referenced pictures of the official spare part to model it as accurately as possible.

I’m not entirely sure about the purpose behind the original geometry - it seems overly complex. However, it’s possible that some dryers use the three holes in the front to clip something in. Additionally, I figured this design saves a bit of material compared to a “solid” part. The “wall” ends up thicker without needing to fill a large void with sparse infill, that potentially can fill up with water - which is a win.

Printing

Body

  • Material: Check your machine’s temperature limits. Mine can go up to 90 °C, so PLA is out of the question. I used Prusament ASA, which has worked great so far.
  • Layer height: 0.2 mm
  • Walls: 3
  • Top/bottom layers: 5
  • Infill: Print more or less solid
  • Supports: Tree supports, 45° interface, with bridge direction perpendicular to the interface

Gasket (TPU)

  • Walls: 2
  • Top/bottom layers: 3
  • Infill: 0 (hollow)

Assembly

  • Insert the gasket into the groove.
  • Attach the plate using 3×15 mm flat-head screws.

Tags