BeeRotor 180 Camera, VTX and 20x20mm FC Mounts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Camera Mount designed for vibration dampening, VTX/LED strip holder, and 30.5x30.5mm to 20x20mm flight controller…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 15
- Makes
- 0
- Views
- 183
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Camera Mount designed for vibration dampening, VTX/LED strip holder, and 30.5x30.5mm to 20x20mm flight controller mount for the BeeRotor 180 Frame.
Read my full build guide here: https://nathan.vertile.com/blog/2017/12/27/omnibus-nox-flight-controller-180mm-build/
Any flight controller will work, but the offset flight controller mount is designed to leave enough space for the NOX flight controller.
You'll need:
2x 2mm (3-5mm length) screws to attach the Camera to the mount
2x 2mm (3-5mm length) screws to attach the LED strip to the mount
8x 3mm (3-5mm length, depending on frame and flight controller thickness) screws to mount the flight controller
I added supports with Mesh Mixer and printed it vertically in PETG with .2mm layer height and 4 walls
Print instructions
Unassociated tags: Flight Controller
Category: R/C Vehicles