1 / 12
Creality K1 Toolhead cover for BCJ Linear Rail Carriage with Dragon Ace MZE hotened — image 1
1 / 12

Creality K1 Toolhead cover for BCJ Linear Rail Carriage with Dragon Ace MZE hotened

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Toolhead cover for K1 and K1 Max printers with a BootyCallJones linear gantry and Dragon Ace hotend with MZE

Rating
0 / 5
Likes
2
Downloads
90
Makes
0
Views
856
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

This toolhead cover design was made to resolve my problems with part fan cooling after I upgraded my K1 Max to a Booty Call Jones linear gantry and upgraded my hotend to Dragon Ace with Melt Zone Extension (MZE) that effectively lowered the nozzle position by ~9mm. I didn't like original Booty Call Jones version of the cover and I found it too high above nozzle which caused reduced cooling effectiveness. This design aims to resolve these issues and in my opinion keep nice original look from Creality toolhead cover. 

I created a version with a D3vil logo which looks catchy in my opinion. If you like it as well you can pick that one instead.

This model has been designed from scratch but I used a model by Henlor as a initial guide for modeling and have taken the vent holes as is. For the logo version I used a logo from D3vil burner but fixed the asymetry in it. 

Features 

  • Drop in replacement for the Creality K1 and Max
  • Lowered and longer cover to match Dragon Ace MZE hotened dimensions
  • Improved fan duct with circular shape
  • Covers top part of BCJ carriage (original creality cover has holes for a top linear rod)
  • Does not require to disconned cable from lidar sensor when removing the cover
  • Interesting design with D3vil logo option

Print settings

  • Material: ABS, ASA, or another heat-resistant material
  • Layer Height: 0.12 (you can print with 0.2 but this lead to more visible layerlines)
  • Line width: 0.4
  • Walls: 3
  • Top/Bottom Layers: 3
  • Supports required (use tree support, top z distance that works for me is 0.12mm but you can get away with 0.2 as well)
  • Print orientation: facing up (please note lot's of support will be used)

BOM

  • 3x Standard M3 Heat Insert (M3xD4.6xL5.7)
  • 3x M3x20 BHCS Screw

Tags