1 / 2
Simple deej Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
This is hardware volume mixer for windows and linux that lets you control the volume of specific applications. It follows the deej project located at https://github.com/omriharel/deej
This is created, in part, to support a class covering soldering and microcontrollers. The guide for the class is at https://mkroa.org/deej-guide. Given the focus on the class, this model is meant to be as simple as possible and utilizes a minimal amount of commodity components.
To build this, you will need:
- Arudino Microcontoller with headers
- https://www.aliexpress.us/item/3256803542334262.html
- 4x 10k ohm linear rotary potentiometers
- https://www.aliexpress.us/item/3256806780863216.html
- 4x Neopixel (WS2812b) strip (60 leds/meter), only 4 leds needed
- Wire (Black and Red, Ideally)
- DuPont jumper wire with female connector
- 2x M3 Heat Set Inserts and screws
- Heatshrink tubing
- (enough to fit ~3 wires and pin from pot, and fit over an individual jumper)