Creality Dry Box 2.0 Bowden Tube Strain Relief
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Prevents PTFE bowden tube bending drama - because extruder should pull, not fight
- Rating
- 4.8 / 5
- Likes
- 44
- Downloads
- 179
- Makes
- 4
- Views
- 1,079
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
Ever put a fresh, fully loaded spool of filament into your Creality Dry Box 2.0 only to discover your filament behaving like an angry spring? Yeah, been there, lost those extruder steps. And it only gets worse with bowden tubes. It's because the hole is radial to the spool, rather than tangential.

So, here’s a simple fix. The filament port is about 8mm wide, while the PTFE tube is 4mm. This adapter lets you mount the tube parallel to the top surface of the dry box, keeping everything smooth and friction-free. See photos, should explain it better.
Mounting is easy:
- screw PTFE tube M6 adapter in the printed part, should fit right in
- drill two 3mm holes in the drybox lid using the included drill template - you can still pop the rubber adapter back if not happy with this mod
- pop in two M3 square nuts (Prusa-style) into the printed part
- use M3 screws to attach it
- slide the tube in - I suggest pushing so it reaches halfway into the dry box for best results.
Or just glue it, if you don't care.
I’ve included two drilling templates:
- one uses M4 nuts as guides so you don’t trash the template after one use
- one’s fully printed if you’re feeling bold and don’t care about repeatability.