Black PSU foot holder stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Very stable base for Black PSU, if you want to put PSU next to it, outside of the case.
- Rating
- 5 / 5
- Likes
- 21
- Downloads
- 163
- Makes
- 8
- Views
- 614
- Reviews
- 8
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Very stable base for Black PSU, if you want to put PSU next to it, outside of the case.
Just print 2 of them and screw 2x20mm into the standard holes with an M3 screw.
----------------------------------------------------------------------------------------------------
Sehr stabiles Fuß für Black PSU, wenn man PSU einach daneben, außerhalb von Gehäuse stellen möchte.
Druckt einfach 2 von dem und schraubt mit M3 Schraube 2x20mm in die Standardbohrungen.
Print time: (with 0.6 Nozzle) - 2,5 hours
3D printing settings
0.3mm layer height
0.66mm layer width
2 - 3 perimeters - 30% infill
Print speed: 35mm/sec