Multiboard/Underware Cable Screw Clamp Snap
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A "Snap" with a cable screw clamp to fix a cable tight and provide some strain relief.
- Rating
- 4.5 / 5
- Likes
- 50
- Downloads
- 281
- Makes
- 1
- Views
- 815
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
Screw clamp to fix a cable to a Multiboard/Underware and to provide strain relief. I use this clamp to fix cables that are threaded trough a cable grommet in my desk so they are not pulled out of their clips or sockets.
I recommend printing with only 0.1 mm layer height for the cap as the thread seems to be printed through the air at higher layer heights. This leads to a very firm fit - if it fits at all.
I uploaded the models with 0.2, 0.3 and 0.4 mm clearance between the threads but for me the 0.3 mm worked fine, when printing the base with 0.2 mm layers and the cap with 0.1 mm layers.