Club Car DS Disc Brake Spacer Golf Cart
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Club Car DS disc brake spacer to reduce empty play in the brake pedal.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 6
- Makes
- 0
- Views
- 185
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution
I installed a disc brake conversion on my 1988 Club Car DS Golf Cart. The disc brake system used way less travel than the stock, so there was a lot of "empty" play in the pedal. I designed these spacers to reduce the play and make the pedal feel better. It starts activating the brakes as soon as I touch them now instead of when I press halfway down. I also made one for the brake light switch so the lights operate as they should.
The main spacer goes right over top of the original. I did have to use a utility knife to cut a slit down it to make it slide over. Then just finish with a zip tie around the channel.
The brake light spacer has holes for a zip tie to slide through to secure it in place.
I printed in TPU with 10 walls and 99% infill so it is very solid.
