SINGER Embroidery Hoop/Frame
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The outer hoop broke on the SINGER XL-100 Embroidery Machine. I modelled and 3D printed the replacement. PN: 386008
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 22
- Makes
- 1
- Views
- 324
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
The outer hoop broke on the SINGER XL-100 Embroidery Machine. I modelled and 3D printed the replacement. PN: 386008
Just take the original hardware off the broken piece and install it on the new one.
I used an M3 threaded insert for the top screw.
I used a 0.6 mm nozzle with PLA on my Sovol SV06 Plus.
Layer Height: 0.15 mm
Walls: 3
Infill: Gyroid 20%
Supports: Bed Only, Snug
I used concentric for top and bottom layers with a modifier on the part that the metal trigger attaches to for aligned rectilinear.
