11mm Reversible Ratchet Wrench
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This one has not been tested yet but is using the same design as the 14mm which has been tested. I made this 11.4mm…
- Rating
- 5 / 5
- Likes
- 24
- Downloads
- 76
- Makes
- 1
- Views
- 403
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Engineering
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This one has not been tested yet but is using the same design as the 14mm which has been tested.
I made this 11.4mm inside.
Tolerances are 0.2mm so print this first- https://www.thingiverse.com/thing:3569489
More sizes to come. I originally made 8mm and 10mm but was asked to design some sizes up to 14mm ;D
Utilizing print in place one-way bearings. No support needed.
If you have any issues printing please let me know, feedback is key to better designs ;)
If i made a positive impact in your life please support me via paypal :D
https://paypal.me/drewbrewchan?locale.x=en\_US
Thanks for stopping by, come back soon ;)
Category: Engineering