14mm Reversible Ratchet Wrench
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Big shoutout to w0rkfl0w for helping me with test prints ;D I made this 14.4mm inside. The design is based off of my…
- Rating
- 5 / 5
- Likes
- 43
- Downloads
- 143
- Makes
- 1
- Views
- 900
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Engineering
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Big shoutout to w0rkfl0w for helping me with test prints ;D
I made this 14.4mm inside. The design is based off of my first one which was alooooot of trial and error. This one went more smoothly though ;)
Tolerances are 0.2mm so print this first- https://www.thingiverse.com/thing:3569489
More sizes to come. I originally made 8mm and 10mm but was asked to design some sizes up to 14mm ;D
Utilizing print in place one-way bearings. No support needed.
If you have any issues printing please let me know, feedback is key to better designs ;)
If i made a positive impact in your life please support me via paypal :D
https://paypal.me/drewbrewchan?locale.x=en\_US
Thanks for stopping by, come back soon ;)
Category: Engineering