1 / 1
LG Refrigerator Door Bottom Hinge Bushing 4984JJ3003A — image 1

LG Refrigerator Door Bottom Hinge Bushing 4984JJ3003A

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Replacement for the door bottom bushing on several LG refrigerators. LG part # 4984JJ3003A

Rating
5 / 5
Likes
8
Downloads
87
Makes
1
Views
319
Reviews
1

Updated at source:

Model information

Category
Kitchen
License
Creative Commons — Attribution — Noncommercial — Share Alike

The bottom door bushing (part # 4984JJ3003A) on my refrigerator (LG LDC24370SW ASWCNA2)  wore out and one of the hinge screw heads on the door was starting to scrape on the hinge pin plate below.

Replacement is $12.95 USD + tax & shipping (A little over $21 all together.) $13.95 and shipping has gone up, now $29 total (2026-11-04), at https://lgparts.com/products/4984jj3003a when they are in stock. (Which isn't all the time. Like when I needed one.)

See complete list of compatible refrigerator models at the above link.

Recommend printing in PETG with two walls, 100% concentric infill, and random Z seam. No supports needed.

Tap it into the socket on the door and add a little silicone grease to the flange and inside of the bushing.

 

Update: PLA2 only held up for a little more than two months before the flange began to split on the Z seam. (The seams were aligned and may have been a weak point. Also, the refrigerator is pretty high traffic in my six person household and has a fully loaded door.) I've reprinted it in PETG with random seams and will see how it does. The real problem seems to be a lack of support for the bottom of the bushing's flange – it rests on a relatively small built in steel flange on the hinge pin. If PETG doesn't hold up either, I'll add a separate washer to go around the steel flange or build one into the bushing itself. Either solution would provide a lot more support.

 

Update 2: PETG with random seams at 31 months and still going strong.

 

Exact fit model: For best fit, print in “exclusive” mode (Cura) or equivalent; otherwise, you may need to adjust horizontal expansion slightly.

Tags