Seeed XIAO ESP32-S3 case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple case for the XIAO ESP32-S3 that solves the issue of the reset and boot button access.
- Rating
- 5 / 5
- Likes
- 45
- Downloads
- 453
- Makes
- 1
- Views
- 2,035
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
This is a simple case for the XIAO ESP32-S3 that solves the issue of the reset and boot button access. I found it was difficult to try, and reset is device, so the case solves that issue. Both LED lights are visible through the openings of the case. The model was generated in Fusion and exported as a binary 3mf file. Originally printed on a MK4s with fine detail, 50% infill without brim using 3D-Fuel PLA Plus. The case does not interfere with the headers and is breadboard compatible. I welcome comments. I will be expanding the design to include the camera and SD card later.