1 / 2
Speedy Stitcher Bobbin
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Spare bobbin or spool for Speedy Stitcher
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 34
- Makes
- 0
- Views
- 93
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
I designed this spare spool to accept a steel axle rather than to include the axle in the print. This is to enable me to wind thread onto the bobbin using a drill. A plastic axle wouldn't survive for long.
For the axle use 3mm or 1/8" steel rod and clean out the hole accordingly and press it in. The length I used was 30mm (the standard axle is 28.50mm but there is plenty room for 30).
I printed the bobbin vertically using PLA with organic PETG support so the support doesn't stick but there are plenty of options.