Sun Seeker Recumbent Trike Toolbox
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I had to take the original design and adjust it for myself.....and others hopefully.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 8
- Makes
- 0
- Views
- 81
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Share Alike
I decided I needed a toolbox for my Sun Seeker EZ-Tad SX recumbent trike. There is isn't a whole lot of things for trikes. The toolbox itself hadn't changed much but it is the underside that was the most important. It is held on with a original design I created to go around the main square frame behind the seat. Ziptie holes have been created and side wedges with support is the main attachment to the frame. Superglued and created 2 screw holes on the bottom so the toolbox is not going anywhere. Filled the screw holes with epoxy so no scratches to the frame and it will never loosen. Printed in ABS to handle the heat. No supports are needed but depending upon your printer, it might need support just on the lid ledge.