Search results: sx

Counting matching models…

Printables

GSXR Key Holder

Key Holder for a rider of a gsxr. It was designed as a gift. I used a filament switch to change the colors.

Printables

APRILIA SX125 Tachometer & Ignition Lock Cover

This tachometer cover fits perfectly onto the Aprilia SX125. It kann easily be put onto tachometer and ignition lock and prevents both from becomming wet in bad weather conditions and even heavy wind. Very helpful, easy to print and looks…

Order a print of this model

Printables

Commodore SX-64 Keyboard Case

Untested! The design is based on careful measurements (made by hand, not scanned) and has been double checked, but I don't have the means to print it to test it myself. If you print it please upload a make and give feedback. This should…

Order a print of this model

Printables

Acura Rsx Hood Puller

Remix of LukeZeDuke design. Added Acura logo Category: 3D Printing

Order a print of this model

Printables

Betafpv CetusX Multi Battery

PT: Atualização! 27/03/2026 V2 com espaços para parafusos (proteção da bateria). Recortes para conectores dos motores. Reforço estrutural em pontos críticos. Compatível com Gaoneng 1s 550mAh/650mAh. Autonomia: 7 min (650mAh) em voo suave.…

Order a print of this model

Printables

XIAO ESP32S3 + SX1262 Case

You will need: 4 M3*8 screws. An IPX/UFL to SMA connector. A 0,96 inch OLED display. The simple WiFi / Bluetooth antenna which comes with the ESP32S3 / Wio-SX1262 set. 4 wires and a soldering iron for connecting the display. Connect the…

Order a print of this model

Printables

XIAO nRF52840 & Wio-SX1262 Kit Case for meshtastic and 18250 battery

A minimalist case for the XIAO nRF52840 & Wio-SX1262 kit. It is designed to be small and portable using the internal antenna. It is designed for a 650mAh 18350 battery, which is enough to power this hardware for several days using…

Order a print of this model

Printables

Adjustable blind spot mirror holder for Hyundai Kona (SX2)

Remix of @DaveDUtah_155970's adjustable blind spot mirror mount for my 2024 Hyundai Kona EV. You'll need to remove the corner panels from the doors and clip one socket side of the print around each. This will be held in place by tension…

Order a print of this model

Printables

Nissan 240SX S13 1991 Wall Art

Nissan 240SX S13 1991 Wall Art silhouette model. Adjustable size.

Order a print of this model

Printables

Meshtastic Seeed Studio XIAO ESP32S3 & Wio SX1262 case mod

The switch_mount_bdy_v4.3mf is an mount for switch with other dimensions than the original model.

Order a print of this model

Printables

Haven – Case for Raspberry Pi-Based MANET (by Parallel × MorosX)

[1/27/2026] – Update (v4) Increased top SMA pass-through diameter to allow full seating of the SMA nut (hex socket compatible) Added internal thread to the previously unthreaded corner through-hole [11/29/2025] – Update (v3) Widened SMA…

Order a print of this model

Printables

Drone Case for XIAO ESP32S3 & Wio-SX1262 Meshtastic & LoRa Kit

Redesign of XIAO ESP32S3 & Wio-SX1262 case to accommodate drone usage. This setup is appx 44g total printed in PETG. This will make most drones in the sub 250g category above 250g. Please follow all laws applicable to your usage. You can…

Order a print of this model

Printables

NSX First Gen 2D Wall Art Honda/Acura

Honda/Acura NSX First Gen 2D Wall Art Silhouette 0.2mm layer height 12% ironing flow 10% infill

Order a print of this model

Printables

Honda Pioneer SxS Panel Cover for switches

Honda Pioneer SxS Panel Cover for switches. Printed in ASA. 4 corner holes line up with the rivet holes from the original warning plate. Rivet nuts used to allow easy removal of the panel. The following items were purchased from Amazon…

Order a print of this model

Printables

MeshTube - XIAO nRF52840 & Wio-SX1262

Mesh node using a ASTM F2158 PVC vacuum tube and a XIAO nRF52840 & Wio-SX1262 kit. Parts needed: -ASTM F2158 2'' PVC tube cut to 130mm + the length of your antenna -ASTM F2158 2'' PVC tube cap -6x M3 x 12mm bolts (Stainless) -2x M3 x 8mm…

Order a print of this model

Printables

Lens Cover for PowerShot SX260/SX240 HS

Friction fit lens cover for a Canon PowerShot SX240 or SX260 digital camera. Designed to be attached with a small keyring to the camera's wrist strap. May or may not be able to pop off on its own when the lens extends. Printing in PLA is…

Order a print of this model

Printables

240sx triple gauge vent pod

I highly recommend printing in PETG CF at bare minimum, supports are not needed as the model can be laid on the flat face. Prints in roughly an hour. Feel free to suggest fixes or address possible fitment issues!

Order a print of this model

Printables

Suzuki GSX-650f Yoke / Wire Holder Mount

This is a mount that will take a 1/4-20 UNC bolt (Cut down) and mounts to the wire cable guide on a suzuki gsx-650f I had to cut the bolt down pretty short for mounting the TPMS module I wanted. These are the bolts I used:…

Order a print of this model

Printables

2014 GSX-R 750 Exhaust bracket template

Template for a GSX-R 750 exhaust mount

Order a print of this model

Printables

TP-Link TL-SX1008 Silent Fan Mod – 120mm Top Mount

The TP-Link TL-SX1008 is an excellent 10 GbE switch, but its stock cooling solution is extremely noisy for home or office environments. Even after replacing the original fan with a smaller 40 mm quiet fan, the noise reduction is still…

Order a print of this model

Printables

Razor Sx500 swingarm plug

made this for my sx500 should work for mx650 mx500

Order a print of this model

Printables

Meshtastic Seeed Studio Xiao ESP32S3 & Wio SX1262 case MOD 1.3 OLED

The changes I made: Rotated the board & moved the USB port to the side instead of the top. (edit, both top and side versions are available) I used a 1.3 OLED instead of 0.96 (pls excuse my old eyes). Widen the case size (width and…

Order a print of this model

Printables

Cannon PowerShot SX260 HS Camera Displayer

This model displays the Cannon PowerShot SX260 HS Camera in a cool and stylish way

Order a print of this model

Printables

Case for SX1262 LoRa HAT Module

Case for SX1262 LoRa HAT Module. Consists of Base and Top.

Order a print of this model

Printables

Gauge Pod Trim Honda Accord/Acura TSX (2003 to 2005)

Gauge Pod designed for 3D Print. Replaces OEM trim piece behing the steering wheel =retainment of cluster gauges. Fitment: -Honda Accord - Model Year 2003 - 2005 -Acura TSX - Model Year 2003 - 2005 -OEM FItment (no holes/trimining…

Order a print of this model

Printables

Hewlett Packard HP48 battery cover calculator HP 48 G GX S SX Deckel Batteriefach Tasc

for HP48G + HP48GX + HP48S + HP48SX Gedruckt mit der Außenseite oben, mit 100 % Füllung und Stützen. Auf dem Rücken geht der Druck doppelt so schnell, aber die Oberfläche wird dann nicht so schön. Die Form ist nicht perfekt, hält aber…

Order a print of this model

Printables

Magnetic Shifter Mod (MOZA Racing ESX Steering Wheel)

Magnetic Shifter Mod This model is a magnetic shifter mod for the MOZA Racing ESX Steering Wheel. The mod will improve your shifting feel. It will feel shorter, more direct, and more aggressive. You can print it without any special…

Order a print of this model

Printables

Seeed Studio Xiao NRF52850 & WIO SX1262 LoRa kit modular case system

This case has modular battery inserts to allow the use of 18350, 18650, and 21700 batteries. The USB port of the Xiao is accessible, and there are two frames. One with just a power switch to wire inline with the battery, and another which…

Order a print of this model

Printables

Camera Cage for Canon Powershot SX620HS (2)

The original cage has evolved slightly. The right handle has been replaced by a knob so kids can better reach the shutter button (age 6-10). Model for smaller hands:

Order a print of this model

Printables

VelesX Mic boom arm ikea anfallare desk mount

Ikea Anfallare desk mount for any mic boom arm. I mainly created this for clamp mounts, but it can be used for a variety of things, such as light strip mounts and so on. I also created a bushing for the clamp part of the VelesX desk mic…

Order a print of this model

Printables

Battery Cover / Lid Replacement for Canon PowerShot SX210 SI

The rubber-like cover on the battery compartment lid of the Canon PowerShot SX210 SI becomes brittle over time. Unfortunately, I couldn't find this part as a separate replacement part. So why not try 3D printing? I made the middle part…

Order a print of this model

Printables

Meshtastic Seeed Studio XIAO nRF52 / SX1262 Case with switch hole

reshaped hole to allow slide switch

Order a print of this model

Printables

KÄRCHER HD 895 SX PLUS Kurbel

Printed with PLA

Order a print of this model

Printables

Accord Euro/TSX (CL7/9) Catch can mount

Also works for the 1st gen USDM Acura TSX!!!! An oil catch can mount for the generic Amazon catch cans you can get for cheap. Reuses the left washer fluid bolt and only uses the bolts that come with the catch can, no extras needed. High…

Order a print of this model

Printables

Box for XIAO nRF52840 & Wio-SX1262 Kit

I printed the parts in PETG. There are a few springs that would break if you use PLA. You can choose whatever color you want for the case and cover, but for the little window you'll want a transparent material. You can read the full…

Order a print of this model

Printables

Vertical Antenna Case for Seeed XIAO ESP32S3 & Wio-SX1262

This is a remix of the Seeed XIAO ESP32S3 & Wio-SX1262 to mount the antenna vertically. No supports needed I added a light pipe and wall mount.

Order a print of this model

Printables

Acura RSX Group 35 Battery Modification | Tray Spacer

The spacer is designed so you don't need to use washers on the battery tie down. You will need a M8x1.25 12mm low profile flat topped cap screw. (the head is 3mm tall) The spacer is also 3mm tall I had an impossible time trying to print…

Order a print of this model

Printables

TPU cover for charging port Super soco TSx

Prints without support. TPU.

Order a print of this model

Printables

Visera Pantalla Voge 900dsx

Visera para la pantalla de la Voge 900dsx, protector reflejos del sol.

Order a print of this model

Printables

SX Pro Jig Holder

Originally cread byThatserafimkid on Thingiverse. The account was deleted but I was able to find a copy, and reupload since I find this model very useful. "I created this jig holder that clips on to the sx pro dongle to keep them…

Order a print of this model

Printables

Suzuki GSX-R frame "PIN"

Suzuki GSX-R frame "pin" (100% infill)

Order a print of this model

Printables

Suzuki GSX-R Steering "PLUG" (STEM YOKE TREE PLUG)

Suzuki GSX-R Steering "PLUG" (STEM YOKE TREE PLUG) (100% infill)

Order a print of this model

Printables

nRF52840 + SX1262 + 18650 case

2 варианта исполнения: просто кейс кейс с выемкой под переключатель Пример переключателя https://www.ozon.ru/product/dvizhkovyy-vyklyuchatel-mini-pereklyuchatel-pitaniya-dlya-arduino-maketnyh-plat-diy-i-elektroniki-1323063165/

Order a print of this model

Printables

Camera Cage for Canon Powershot SX620HS

Protects the camera and helps children taking pictures To help children learning photography, I've designed a cage with two handles. All buttons, the battery compartment and even the flash remain accessible. The tether is also maintained.…

Order a print of this model

Printables

Sustituto Ren-sha Para ordenadores MSX Panasonic

Botón de Ren-sha para ordenadores Panasonic MSX , F1-AWSX f1-AWX , TurboR

Order a print of this model

Printables

Suzuki GSX-S 1000 GT/GX Pannier reflector delete

A base plate to fill the reflector space on the GT - print this then stick a Suzuki badge to it. The badge I used was from eBay, item number 184397274069 Print this in PETG to reduce the risk of it melting, but be aware it may not cope…

Order a print of this model

Printables

radiator support bracket Nissan S13 / 180SX / 200SX / 240SX

a radiator support bracket, fits Nissan S13 / 180SX / 200SX / 240SX probably also other 90s Nissans

Order a print of this model

Printables

Goggle-Strap Adapter for walksnail gogglesX

A simple adapter to use standard straps on the Walksnail Goggles-X. I printed the clips in TPU with 100% infill on my Bambu Lab P1S.

Order a print of this model

Printables

Sustituto Ren-sha Para ordenadores MSX Sony

Order a print of this model

Printables

Contact Housing Brake Master Suzuki GSX400FW 1983

Tuto součástku již není možné sehnat, tak jsem ji vytvořil. Výtisk z ABS

Order a print of this model

Printables

GSX-R Suzuki - Keychain - Portachiavi - Porte Clès - 钥匙链 - Schlüsselanhänger

GSX-R Suzuki Keychain - Portachiavi - Porte Clès - 钥匙链 - Schlüsselanhänger Resize to adjust dimension If you download/enjoyed this file, please leave a like - Thx Category: Gadgets 08/06/2024 added: GSX_R_2.stl All trademarks, logos and…

Order a print of this model

Printables

Commodore SX-64 Keyboard Case

Untested. The design is based on careful measurements (made by hand, not scanned) and has been double checked, but I don't have the means to print it to test it myself. If you print it please upload a make and give feedback. This should…

Order a print of this model

Printables

Polaroid SX-70 9v Battery Holder

This is custom lower profile battery holder for the Polaroid SX-70 model of cameras. With your power connection coming out of the camera already, solder your 9v connector, buck converter, and switch (if you're using one) to the wires…

Order a print of this model

Printables

Wavy77 MSX Computer Handle

Handle for MSX Wavy77 computer, for easy transport

Order a print of this model

Printables

Pioneer SX-838 Indicator Lamp Housings

The indicator lamp housings were crumbling apart on my Pioneer SX-838. I was unable to remove the old bulbs and replace them without destroying them. These are exact replacements. You'll need to install the new bulb from the front (fish…

Order a print of this model

Printables

Replacement shell for psx action replay

The original shell for my particular psx game code thing seemed to purposely strain when fitting the front to the back. If I were inclined, I'd completely redesign this using the inner board only instead of the original shell as…

Order a print of this model

Printables

Mini Commodore SX-64 (1:5 Scale)

Using a Bambu Labs Printer? Find this model on MakerWorld including the print profiles. The Commodore SX-64 was a ‘portable’ version of Commodore’s successful Commodore 64 home computer, released in 1983 just months after the C64. Whilst…

Order a print of this model

Printables

tsx 01 - Tissue Box Cover

Consider following me on Instagram (@SMACKMAX_). I try to post all of my projects to build a portfolio of my Objects, often in advance of publishing the models. https://www.instagram.com/smackmax_/ Hello! Here’s TSX 01, a Tissue Box Cover…

Order a print of this model

Printables

Multiplex Cockpit SX 7/9/12 Pult | Console

Pult für Multiplex Cockpit SX 9 (7 & 12).

Order a print of this model

Printables

FSX to ATX Power Supply Mount / PSU Adapter

Here is an adapter to allow mounting and using an FSX power supply in an ATX case. The screw holes in place of ATX PSU metal threaded holes are sized for steel screws to self-tap (even if not technically self-tapping). In my tests with…

Order a print of this model

Printables

Polaroid Picture Display Storage Box & Frame SX-70 600 & I Type Film

Here is a simple little display box that you can store your Polariod photos in!

Order a print of this model

Printables

Honda NSX Keyring

Print the nsx.3mf file Has two colors, back color and front color First print the back color then before layer 16 starts (at 0.2mm layers) you change the filament I use the Filament Change plugin from Cura, it stops the print before layer…

Order a print of this model

Printables

Swivel Bracket for MikroTik SXT Lite5

The standard MikroTik Bracket fastens around a pole with a clamp. I wanted to mount it in a protective cabinet against a wooden board. Also needed to point it at an angle. The standard bracket was also too high to use in cabinet. First…

Order a print of this model

Printables

EPOS GSX 1000

EPOS GSX 1000, Sennheiser GSX 1000 or Sennheiser GSX 1200

Order a print of this model

Printables

Llavero gsxf

este es llavero es de GSX-F y utiliza PLA y se ha hecho en orca slicer a una tempereatura de 220 grados y 60 en bandeja

Order a print of this model

Printables

Playstation - PSX Wall Art

it's time to decorate your studio, your room, your home with a Playstation (PSX) shell I remodelled to perfection a real Playstation cover from the 90s You decide whether you want to print it in several colours or with a single colour and…

Order a print of this model

Printables

SXTH Element Intake Lid for 20-24 Hyundai Sonata N-Line & Kia K5 GT

Decided to make a better lid for my SXTH Element intake. NOTE: This ONLY fits this intake: https://sxthelement.com/collections/2021-2023-sonata-n-line-dct/products/2-5t-k5-gt-sonata-n-line-cplt-intake-redesigned

Order a print of this model

Printables

Suzuki GSX 1400 - front brake pipe adapter

Adapter for the original brake pipe holder to the replacement pipes (diameter 3.5-3.7mm)

Order a print of this model

Printables

GSXR Key Holder

Key Holder for a rider of a gsxr. It was designed as a gift. I used a filament switch to change the colors.

Order a print of this model

Printables

Polaroid sx-70 one step prop

just an accessory I had fun making DOES NOT WORK. ONLY A PROP (9 by 9 cm)

Order a print of this model

Printables

Mitsubishi ASX backseat lighting

Backseat lighting house for Mitsubishi ASX (might fit other models) Just remove the backseat handles and use it's screws to put it in place *need to install a wire from the main light in the front to the backseat light is from ebay:…

Order a print of this model

Printables

Mitsubishi ASX backseat lighting v2

Smaller light for the backseat of Mitsubishi ASX Light link: https://www.aliexpress.com/item/1005003171890899.html

Order a print of this model

Printables

QuickClick hose adapter for Stanley SXVC30 vacuum.

Adapter for connecting a Cen-tec Quick-Click dust extraction hose to your Stanley vaccum cleaner. Prints well laying on the flat hose connector. No support, brim or special material is needed. Remove the twist lock original hose and put…

Order a print of this model

Printables

s13 240sx 5 1/4" & 6.5" speaker plate adapters

s13 240sx 5 1/4" & 6.5" speaker plate adapters. Enjoy!

Order a print of this model

Printables

SSX303 TDC Cover

Works for my SSX303 rifle, mine was broken into 2 pieces Culprits: side holes are swiftly bigger than the original, but works you may need to thread the main screw hole.

Order a print of this model

Printables

APRILIA SX125 Tachometer & Ignition Lock Cover

Order a print of this model

Printables

KEF LSX Desk pad / Tischstandfuß

Hey! To put my new LSX II's a little higher on my desk, I've tried to recreate a look-a-like to the original stands from KEF. The speakers are 10 degree tilted upwards. I've printed them with e-Sun ABS+ and connected them with an ¼ screw…

Order a print of this model

Printables

SSX23/Mk23 Airsoft Foam-filled Suppressor

16 CW suppressor with foam insert compatible. Works with SSX23 or Mk23! A Few Things to Note: - Used Electrical Tape to hold pieces while glue set. - Compatinble with the Novritsch Ghillie Suppressor Cover - Uses 4" foam paint rollers as…

Order a print of this model

Printables

Canon SX50HS Utility Box

I have a Canon SX50HS, it's a bridge type camera. I designed a box to store and transport my two extra batteries and two SD Cards. I used this glue to fix both halfs together: Link

Order a print of this model

Printables

cover labists sx1 printer mini

make your printer look very good

Order a print of this model

Printables

Commodore SX-64 Keyboard Case

Order a print of this model

Printables

Apple OSX keychain

Apple OSX operating system icon keychain. Two models: - STL in three heights for color change - 3mf for 3 extruders or 1 single extruder with 3 stops for filament change. For this model I include a 3mf file with configuration on a Prusa…

Order a print of this model

Printables

NSX NC1 Trunk Trim Panel Fasteners

Replacement Trunk Trim Panel Fasteners for the Acura NSX NC1. The OEM fasteners are known to come loose and fall out. This replacement has more thread surface to hold than the OEM. Printed in ABS. Two versions. Version one has a slot like…

Order a print of this model

Printables

NSX License Plate

Use this as your license plate at shows or car meets. CNC it, or print in filament and wrap it for some color. -- Check out some of my other NSX products at my Etsy store .

Order a print of this model

Printables

Support mural KEF LSX II décalé

Description en français : Support mural conçu pour les haut-parleurs KEF LSX II, avec un léger décalage pour éviter que le câble d'alimentation ne soit obstrué. Pour une solidité optimale, il est recommandé d'utiliser un remplissage de…

Order a print of this model

Printables

Displayabdeckung Yamaha PSR-SX700/900

Ein Mehrfarbdruck für eine Displayabdeckung für Yamaha Keyboards PSR-SX 700/900.

Order a print of this model

Printables

MikroTik SXTsq Lite5 antenna holder

Simple holder for MikroTik SXTsq Lite5 antenna. No adjustment (it can be done by redesigning the fix part). My printing setup: Material: Prusament PETG Nozzle diameter: 0.4 mm Layer height: 0.25 mm QUALITY Infill density: 30% (Gyroid)…

Order a print of this model

Printables

Gatehunter SX

This is a remix of the Gatehunter X by Dave_C_FPV. This version features: a more race-oriented stretched x geometry minimalized arm tips with 90° rotated motor mount pattern (I run my motor wires on the downside of the arms) slots for a…

Order a print of this model

Printables

Commodore SX64 bracket for 5.6 inch LCD Screen (AT056TN52)

Bracket for SX-64 monitor replacement. Fitting LCD & Controller: AT56TN52 & JD567M03 Two versions: Angled: This fitted perfectly into my SX-64 because my SX-64 is not right angled. Right angled: if "angled" doesn`t fit for you, you can…

Order a print of this model

Printables

NVIDIA Tesla V100 SXM2 Heatsink Fan Shroud with Magnet Insets for 60mm Fan

Shroud improves cooling by 15%+ on V100 16GB version. Organic tree generation with 100% first layer density and 3mm first layer expansion worked best for me for best bed adhesion.

Order a print of this model

Printables

ACERBIS RALLY BRUSH Adaptors for APRILIA SX125

This is a set of FOUR holders to mount the ACERBIS RALLY BRUSH protectors to the bar of your Aprilia SX125. It also works in addition with the mounted Acerbis Rally Brush SPOILERS for even more protection against wind, rain and dust. Of…

Order a print of this model

Printables

GSX-R

Přívěsek Gsxr

Order a print of this model

Printables

Gakken SX-150 replacement knob adapter

Two of the knobs on my Gakken SX-150 synthesizer went missing. I've never seen ones like them available; the center extends behind the skirt to go on pot shafts recessed below the front panel. Rather than print some questionable looking…

Order a print of this model

Printables

GSX-8R/8S USB-C Charging Socket

For some reason the OEM USB connector costs $80 here and I had a bunch of Sumitomo connectors sitting around, so I decided to DIY a USB port that sits in the same spot. Fitment should be perfect as I designed the parts off a…

Order a print of this model

Printables

Clamp MSX Mainstream Bike Bags

My friend lost its bag clamp for his mainstream msx bag, as we are going on a bike tour next week we needed a replacement. No free for you all folks! With msx this item seems non deliverable as spare part at this time! Category: Sport &…

Order a print of this model

Printables

suzuki sx4 keychain

you need to scale it slightly. enjoy your keychain

Order a print of this model

Printables

GSX-8R/8S Flip-Up USB-C Charging Socket

I didn't like the fiddly silicone cap that came with the weatherproof USB-C ports I ordered from Aliexpress for this https://www.printables.com/model/1111435-gsx-8r8s-usb-c-charging-socket , so I've created an alternate USB port that…

Order a print of this model

Printables

Xiaomi SSXCQ01XY Vacuum Cleaner Wall Mount (NEW VERSION V2)

This wall model is made with only 80 grams of filament and does not require any support. In the photo, the original model is printed with ABS material, but for better results, it is recommended to use PLA and a 0.4 nozzle. The size of the…

Order a print of this model

Printables

LoversXMeteck Front Shield Camera Mount

en cours

Order a print of this model

Printables

LoversXMeteck Wicked Antenna Mount

Antenna mount for all video system

Order a print of this model