Fan bracket for Hoymiles HMS1600-4T micro inverter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
During a load test, the passive cooling was insufficient, which meant that active cooling was required.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 105
- Makes
- 0
- Views
- 674
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
📄 Fan bracket for Hoymiles HMS1600-4T micro inverter
✅ Compatibility
This clip-on bracket is designed for the Hoymiles HMS1600-4T microinverter and potentially other HMS/HMT models.
The inner width of the slot (fit over the cooling fins) is 106.6 mm – please check this measurement on your inverter for compatibility.
The opening width of the clamp is 40 mm, meaning only the inverter housing width needs to be measured for a quick check.
🔧 Mounting Details
The bracket slides onto the cooling fins without any tools, drilling, or modifications.
It supports two standard 120 mm fans, mounted with a 20 mm offset from the housing.
Mounting holes are prepared for M4x30–35 mm screws and M4 insert nuts (suggested: 5–8 mm long).
The fans should be protected against dust and splash water in order to maintain their service life.
Note:
The fans can be operated as required via a small solar panel with PWM temperature control or via Smart Home (e.g. Shelly or similar) depending on the temperature measurement.
I myself use an old PTC control board (12V PWM Fan Control @Amazon.de) with an 18V solar panel and a remote temperature sensor which was on stock from another project. I also mounted an aluminium metal sheet in front of the fans to protect them from environmental influences. Although the fans are originally intended for PC use, I hope they will last long enough for outdoor use.
🛠 Recommended Print Settings
- Material: PETG or ASA for outdoor durability
- Infill: ≥ 30 %
🌦 Use Cases
- Avoiding power derating due to high temperatures (> 65 °C) and increase service life by activly cooling the microinverter.
🧩 Design and Functionality
- Robust clamping mechanism holds firmly to the cooling fins
- Extended frame design allows full-size 120 mm fans
- Tool-free installation
📋 Materials List
- 2× printed fan bracket (this model)
- 2× 120 mm fans with 105 mm distance to the mounting holes, preferably with closed motor housing
- 8× M4x30–35 mm screws
- 8× M4 heat-set insert nuts (5–8 mm)
🔗 Related Models in My Collection
Currently none
📦 Compatibility & Credits
Feel free to remix or adapt it — feedback welcome!
I will add a few more pictures soon. The uploaded picture is from the first try on.