Approve / Reject Stamp
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Y-junction stamp design that has two stamp faces...one for a positive check mark, one for a negative X mark.
- Rating
- 0 / 5
- Likes
- 21
- Downloads
- 14
- Makes
- 0
- Views
- 109
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
Pivot this rubber stamp side-to-side to alternate between approve and reject.
Print this Approve / Reject Stamp using a FLEX material. The stamp shown in the photos was printed using Matterhackers Grey TPU. The settings are shown in the .3mf file.
**Prints nicely on a Textured plate without glue since the stamp face is not on the build plate.
**A light, 5 to 10 minute sanding of the stamp face works well.
Settings:
1.) 0.20 mm (Structural) layers
2.) Generic FLEX
3.) 15% Infill
4.) Orient with stamp faces directed upwards (away) from build plate
5.) No supports
See my other Stamps & Seals contest entries here.
Enjoy!