Counting matching models…
Designed in collaboration with my wife (the knitter), to at least match the performance of her favourite mass-produced injection-molded knitting clips. (I figured there was not much use making something she wouldn't use anyway. Took me 6…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
Celebrate your love for the woods with the Outdoor Life coaster—a rugged yet classy design made to bring the outdoors in. This model uses purposeful extrusions to guide flawless color swaps and includes a .3mf project file with pause…
Print approx. €1.35–€1.65 excl. taxPreliminary estimate for one variant
You worked so hard on this merge request. All these failing tests you fixed. It finally works in staging. The changelog is up to date and you already labeled it reviewable . But what is this? *chirp chirp * No one is approving it. You…
Print approx. €0.92–€1.12 excl. taxPreliminary estimate for one variant
Its a cat scratcher... print it, grab it, play with your cat with it.
I wanted to bag a disc at tournaments that I made , so I started the process of designing a putter that was fairly stable, but could handle some anhyzer/flex. During the design process I realized the disc also floats in water pretty…
This silly model is scaled to a standard domesticated pet rat (female rat, sizing may vary). It is intended to be segmented and connected together with string or a rubber band. Most likely, you may have some difficulty convincing your rat…
Prints on its side. 4 t/b/w 12 - 15% infill. Added a recess spot in the bottom to reduce weight and hide a peppermint. Windows and wheel openings added extrusion for better printing *Edit - non moving wheels
Model shown was in Overture 95A TPU with 100% infill Took about 16 hours at 20 mm/s with a Creality K1 ~110 grams of filament (at 100% infill) Will update with time how it holds up from my dogs abuse. Update - Its been a couple weeks and…
Prints on its side. 4 t/b/w 12 - 15% infill. Added a recess spot in the bottom to reduce weight and hide a peppermint.
With this model there is a blank plate and you can be creative in the slicer by adding additional file. Set additions at 0.4-0.6 above(positive) or below(negative cut) the plate for a color swap. Please NOTE to allow for the blank to…
Prints on its side. 4 t/b/w 12 - 15% infill. Added a recess spot in the bottom to reduce weight and hide a peppermint. Windows and wheel openings added extrusion for better printing
Prints on its side. 4 t/b/w 12 - 15% infill. Added a recess spot in the bottom to reduce weight and hide a peppermint. Windows and wheel openings added extrusion for better printing *Edit of Wheel so they don't move
I printed this on a 220mm X 220mm machine (ender3S1). I superglued(CA) it together. The “head” prints with the large flat side down, no supports. The “shaft” prints with the wide side down, no supports. The “handle collar” prints with the…
I've seen a picture of the original sign on an image board and was laughing pretty hard. I'm not able to buy it in germany so I decieded to 3D print it. The idea of the sign is not mine but the model is. I'm unsure if I'm allowed to…
4 t/b/w 12 - 15% infill. Added a recess spot in the bottom to reduce weight and hide a peppermint. If you are printing for the Community Print Drive , be sure to use the appropriate guidelines: 2024 Christmas Community Print Drive…
This ear saver is minimal, functional, and officially licensed for use in American hospitals and other clinical settings. I added a recycling symbol for PLA. The Fusion360 file is included for more modifications. It is not parametric,…
This simple and practical Garden Plant Hook and Extender System allows you to hang your garden plants easily. The system consists of two parts: the hook and the extenders, which come in different lengths to fit various pot sizes.…
Prints vertically and one building nest inside the larger. 4 t/b/w 12 - 15% infill. Added a recess spot in the bottom to reduce weight and hide peppermints. *Edit of Chrysler building top.
Prints on its side. 4 t/b/w 12 - 15% infill. Solid model and Recessed model (for candy) Added a recess spot in the bottom to reduce weight and hide a peppermint. Windows and wheel openings added extrusion for better printing *Edit of…
Hello everyone! (ツ)╯ I designed this spherical shaped holder for houseplant (Fig.: (A)). It consist of five parts; the frame, consisting of three parts (Fig.: (A,3), (B,3)), a top connector (Fig.: (B,1)) and bottom connector (Fig.: (B,2))…
Winestopper with two pieces: Stopper itself and a sleeve. The sleeve should be printed in TPU, the stopper itself can be printed with PLA, ABS, etc. As decoration I used the low poly cat from Andrew_Sink : Low Poly Sitting Cat Both pieces…
Prints on its side. 4 t/b/w 12 - 15% infill. Added a recess spot in the bottom to reduce weight and hide a peppermint. Windows and wheel openings added extrusion for better printing *Edit of Wheel so they don't move
Prints on its side. 4 t/b/w 12 - 15% infill. Added a recess spot in the bottom to reduce weight and hide a peppermint. Windows and wheel openings added extrusion for better printing *Edit of Wheel so they don't move
I created this part to help our group #3DPPGH to make usable face shield kits. Having fixed the inconsistent width of the currently validated DtM v3.1 NIH model, the splatter gaurd now prints so tough that it is difficult to bend the…
For this approved stamp I used the awesome handle made by Dani Bautista and made the stamp myself. It's a nice stamp to play around especially if you stamp with the color red :)
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
We decided we needed a more secure way to manage our toddler - who is a three year old Labrador retriever. Another gate (the kind with the metal bar across the bottom and a door within the gate) to the rescue - now how to protect the…
Anamorphic 3D model of the Prusa approved designer badge.
▂▃▅▇█▓▒░𝙳𝚎𝚜𝚒𝚐𝚗░▒▓█▇▅▃▂ A simple holder for the BOSE speaker for the desktop. ▂▃▅▇█▓▒░𝟹𝙳 𝙿𝚛𝚒𝚗𝚝░▒▓█▇▅▃▂ Two version are available. One with a flower integrated and one without. Ask your girlfriend which one she likes better.
4 t/b/w 12 - 15% infill. This my own design but did take inspiration from other models to create this. These would allow for more creativity for roundabouts & intersections.
Bring holiday cheer to your creations with these festive 3D stamp models! Featuring Santa-Approved , Elf-Verified and Merry Christmas Stamps! They’re perfect for adding a magical touch to your projects. Ideal for crafts, gifts, or…
Current Version 2.1 - 9/21/2017 All screw holes are for #8's I have seen a lot of different spool holders out there and none of them have been able to give me exactly what I'm looking for. Below is a list of things I'm trying to achieve…
This is a simple ink stamp with interchangeable plates. Print the Plates with the lettering side to the build plate. Use minimal or tree supports. You might have to sand the stamp with fine sand paper (300 grit or higher). I made these…
Tested on my cat and he is obsessed with it, loves it better than all other toys I bought. My cat loves it in clear PETG, but your cat could have a differernt preference :)
https://MineeForm.com/ ✅ Unlock All STL Files Immediately ✅ Make Money by Selling 3D Prints ✅ Only $10 a Month (Cancel Anytime) Category: Models
I created this part to help our group #3DPPGH to make usable face shield kits. Having fixed the inconsistent width of the currently validated DtM v3.1 NIH model, the splatter gaurd now prints so tough that it is difficult to bend the…
I created this part to help our group #3DPPGH to make usable face shield kits. Having fixed the inconsistent width of the currently validated DtM v3.1 NIH model, the splatter gaurd now prints so tough that it is difficult to bend the…
Simple Approved & Denied stamps for the 2025 Stamp Design Contest | Printing Settings | I recommend printing with high shore hardness TPU Using a smooth plate is also recommended to keep the stamping surface smooth Happy Printing!
Print it in any fillament you get.
Here is the new official NBA basketball - approved by the NBA commissioner. This has knobs for extra grip when the players grab it. Those knobs also add a satisfying swishing sound when going through the net. The NCAA is considering…
A drawing tool to help you make a approval stamp! Print it with at least 60mm x 30mm, 0.2mm quality Made with Blender and Tinkercad
I've included a version with an "APPROVED" text, and a version with no text. Print the stamp head with the stamping side facing up to avoid large overhangs, and if you are having issues with printing the handle as one piece, try splitting…
Sello del meme APPROVED KNUCKELS, dale un giro a tus notas de escuela
Let's be honest: the classic Benchy was cute, but it was missing that "I'm about to kill you in your sleep" vibe that only H.R. Giger could deliver. So I took the most printed hull in 3D printing history and made it meet a Xenomorph in a…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Well, it's a stamp. Untested.
Organize your Diamine ink collection with this custom-designed, stackable bottle holder! Designed specifically to fit standard Diamine ink bottles, each unit securely houses a single bottle and can be stacked vertically with others for…
Pivot this rubber stamp side-to-side to alternate between approve and reject. Print this Approve / Reject Stamp using a FLEX material. The stamp shown in the photos was printed using Matterhackers Grey TPU. The settings are shown in the…
When you get Vader Approved it's an Honour!
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 106.33x150mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.1mm…
print with supports and a strong infill. this is a model I made for the stamps contest!
This award uses fun loving Ralph, a ping pong ball, to show that the winner deserves their award.
Designed with care and purpose, this custom faucet lever extension makes it easy for little hands to reach and operate the Gessi Rettangolo one-way diverter (Part No. 20119). Originally created to help my own child gain independence at…
Couldn't find a Nanuk TSA Approved Lock strap replacement and was tired of constantly losing them. Printed in TPU 95A with slightly tighter tolerances than the original strap so it doesn't come off so easily. I use this lock specifically…
Just a quick crank jig, i made the Spacer and Reducer specifically to true a NSR125 crankshaft. i made the dimensions quite generous for bigger bikes in the future. it mounts to the bed of my mill, and i used a dial indicator holder to…
it should fit together edit: original file wasn't mirrored soz
A large approved stamp with ergonomic handle and 3mm high stamp surface for clear prints!
Not my design, source is at https://3dprint.nih.gov/discover/3DPX-013238?utm_source=share&utm_medium=ios_app Placing this here on Thingiverse as a mirror. The NIH website is frequently overloaded due to demand. Requires a single US Letter…
cacti dude thingymajig pls like i need prusameters
A drawing tool to help you make a approval stamp! Print it with at least 60mm x 30mm, 0.2mm quality Made with Blender and Tinkercad
Just a quick crank jig, i made the Spacer and Reducer specifically to true a NSR125 crankshaft. i made the dimensions quite generous for bigger bikes in the future. it mounts to the bed of my mill, and i used a dial indicator holder to…
![Road Intersections (Approved Scale) [To compliment Abby and VreeDogs roadways]](https://media.printables.com/media/prints/1050852/images/8044243_5da8d9c9-50ed-4dd3-939a-d76397b4ec94_3ac0a365-733c-4eea-abe1-82837dbad957/20241030_204810.jpg)
