Dji RC2 Self-Balancing Neck Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount with arms and knurled screw adapter (M4x20mm) to hang DJI RC2 level using neck strap easy to attach/remove
- Rating
- 0 / 5
- Likes
- 21
- Downloads
- 121
- Makes
- 0
- Views
- 560
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
This is a self-balancing mount for the DJI RC2 remote controller, designed to let it hang level when attached to a neck strap. It consists of two plastic arms that screw into the existing mounting holes on the controller. Each arm has a hole for a neck strap (4mm in diameter), shifting the center of gravity so the controller stays horizontal—even when not held in hand.
Also included is a small model to insert an M4x20mm hex nut and convert a standard M4 screw into a thumb screw. This makes it easy to attach and remove the arms on the go—no tools needed.
Ideal for drone pilots who want hands-free access to their screen while keeping the controller steady and visible.
needed parts:
- M4x20mm hex-screw
- rope (approx. Ø4mm diameter)
printing:
- PLA is fine but PETG propably better
- print in full perimeters or 100% infill
- minimum 0.2mm layer height (0.1mm recommended)
- supports: I recommend to use supports for the hex inserts and screw holes on the arms (organic)
- use a brim if you dont have the best adhesion
assembling:
- put the screws in place (you might have to use a bit force for them to properly fit)
- put the rope through the holes and make a knot on the flat end side of the arm (if you use a synthetic rope you can burn the ends to melt them)