1 / 3
K1 Max with CFS Upgrade rear riser segment
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A modified rear riser segment to allow the lid to be used with the CFS Upgade
- Rating
- 0 / 5
- Likes
- 27
- Downloads
- 273
- Makes
- 0
- Views
- 2,082
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
I rotated the object 45 degrees so that it fits onto the K1 Max print bed easily. I also enabled auto tree supports just to make sure the holes didn't have issues since I didn't want it squishing the PTFE to introduce friction.
You may need to reuse some of the old tube that was in use before the upgrade. Steps to use:
- Print and install the riser, I like to add some adhesive backed foam around the top for the glass to sit on, but thats optional.
- Install the PTFE coupler onto the back of the riser using the provided M3 scew that is securing it after upgrade.
- Feed a tube of the right length from the coupler through the hole and into the extruder, add some of the previous PTFE clips to secure it to the cable chain, I ended up using the old tube that was used before the upgrade, I guessed at the length, I just made sure there were no tight bends. (See cover photo)
- Connect the CFS buffer to the coupler using a length of PTFE long enough to have a nice wide radius. You may need to move the CFS buffer to another spot on the back of the K1 Max. (See photo 3)
- Test it all.
Note: This works for me, this is a do it at your own risk, if it breaks, I can't help you, and I doubt creality will help you..