1 / 2
Angled Buddy3d Profile Mount MK4/S/other
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Angled so you can see the bed better. On flat version, most of camera view is above the build plate.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 33
- Makes
- 1
- Views
- 189
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I made this because the original was mostly looking above the build plate, but I wanted it to look more at the build plate.
This is a remix of the other profile mount holder, twists into place on and holds onto the camera firmly.
Insert the mount sideways, then twist clockwise 90 degrees to fix it on the 2020 extrusion. Then, remove the protective cover by twisting on the bottom of your Buddy3d Camera, slot it onto the mount, and twist 90 degrees.
I printed it with regular supports, 2 walls, 15% infill.