Filament Guide for CR-6 SE
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.60 – €1.96 net (excluding VAT)
For file: Filament_Guide_1h51m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.78 excluding VAT (range midpoint).
- Weight reported by the author
- 21 g
- Print time reported by the author
- 1.84 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Filament Guide for CR-6 SE
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 15
- Makes
- 0
- Views
- 87
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
This remix was made so the roller would better line up with the runout sensor on a CR-6 SE printer. All the other parts can be downloaded and printed from the Thingiverse link.
You will also need two M5 x 30 screws to mount it to the frame, and one M4 x 25 to attach the roller. Edit: New roller design.
It was printed with eSun PLA+ Orange 1.75mm
Layer Height: 0.2
Perimeters: 3
Top and Bottom Layers: 3
InFill: 25% Support Cubic