RPi Zero and Zero 2W snap-in-case and stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Snap-in-case and stand for Raspberry Pi Zero (W) and Zero 2 (W)
- Rating
- 5 / 5
- Likes
- 30
- Downloads
- 216
- Makes
- 3
- Views
- 1,040
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The case is based on the Raspberry Pi Zero W Snap-In Case Remix of Bigjeffrey.
I modded it and designed a stand for it.
The V1 stand is friction fitted and I havent tested the V2 yet.
If you want to use a heatsink, I would recommend installing it after the RPi is inserted into the case, otherwise you may have problems closing the case.
I have testet it with RPi Zero and Zero 2. Both fit great in the case.
If you want to use a Raspberry Pi Camera (V. 1.3, V. 2 or HQ) it should work fine. But I have tested it only with the V. 1.3.
Printed the stand with 0.3mm and the case with 0.2mm layerhight.