1 / 3
MKS mini 12864 display enclosure for Sovol SV06 Plus
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Enclosure for MKS mini 12864 display for Sovol SV06 Plus
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 10
- Makes
- 0
- Views
- 79
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- GNU General Public License v3.0
The stock Sovol SV06 Plus touch screen display doesn't work with mainline Klipper. This is a box to mount an MKS mini 12864 display. It will probably also work with the similar models from BigTreeTech and Fysetc.
I chose this mounting location because it doesn't increase the footprint of the already-large printer. The bed slides over it during printing. Many other display boxes make the printer wider.
You will need to remove the front panel of the printer. You will need to supply:
- MKS mini 12864 display
- two fairly long 10-pin ribbon cables (50cm is not long enough, 100cm is too long. I made custom cables.)
- cable ties for these new cables
- assorted M4 machine screws
- five short M3 threaded inserts
- five 4-8mm long M3 flat head machine screw
