Minisforum V3 Clip Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is my custom designed Clip Case for the Minisforum V3 Tablet, designed to print easily on my Creality K1C.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 54
- Makes
- 0
- Views
- 851
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial
This is my case design for a Minisforum V3 Tablet, designed to be printable on my Creality K1C's 235x235 print bed.
You'll need to print:
2 back plates
2 frames
4 feet
2 clips
The back plates need to be glued to the frames, I used super glue and started with letting a corner dry, then the short edge, then the others one at a time, being careful to keep it aligned before it sets.
I added some guides on the back plates for aligning the clips and feet, but they aren't perfect, so I put them in the “versions” folder if you want to try them out. There's also solid models of the tablet - with and without keyboard slots - so you can chop it up as you please for your own printer sizes. I cut the release version to minimize supports due to MANY failed prints.
I've only printed this in PLA so far, but I expect once the tablet gets warm there might be some deformation.
DISCLAIMER
You are solely responsible for the safety of your device. I do not guarantee that this case will protect your device from a fall, bump, toss, or even a low-speed collision with a feather. It is absolutely not waterproof, nor is it edible. Do not leave in the presence of children - that tablet is expensive!!!