Qidi X-3 Extruder for Bambulab Hotends (esp. Panda Revo)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a replacement part for X-Smart 3, X-Plus 3 and X-Max 3 extruder with modified mount for X1C, P1P and P1S hotends
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 44
- Makes
- 0
- Views
- 507
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
I use a Panda Revo for a year now inside my X-Max 3. However, while the Bambulab and Qidi use quite simular hotends, they do not fit exactly. So I had to do some filing and drilling to do it.
After I discovered the model I remixed here, I modified it to use Bambulab hotends directly - including the Biqu Panda Revo. This makes the mechanical part very easy. I used Prusament PC-CF.
However, you need an aditional MCU, as Revo uses a thermistor, while the toolboard on the Qidi has an input for a k-type thermocouple. So you have to add an input for a thermistor. I used an old SKR e3 mini (with defect x-stepperdriver) on the X-Max 3 and an old MKS gen-L on my X-Smart 3, flashed Klipper to it and edited the configs, so the hotend-thermistor input on the 3rd MCU is used instead the thermocoupler input on the toolboard. You need a 2-wire extension cable fiddled through the cable chain.
You could alternativly use a Revo HT instead of the Revo heatercore, using an e3d 3mm thermocouple, connecting it to the toolboard instead to avoid adding a 3rd MCU. However, you need to modify the fanshrout, as the Revo HT has larger dimensions and would melt the original fanshroud. Also remember thermocouples have a polarity, so if it reports wrong temperature try swapping the wires. You could print more as 300°C using the Revo HT only if also using HT-nozzles.
With a normal Revo heatercore you are limited to 300°C.
The big advantage of Revo is of course the easy way to change nozzles. As all Revo nozzles (exept the Belt nozzle and some early production samples) have exactly the same lenght, no z-offset recalibration is needed. You could even change nozzle size in a print at a certain layerhight (manually editing the gcode) - for example first 3 layers with a 0.4 mm nozzle (maybe with manual colour changes) and the rest with 0.8mm. Have not tryed it on the Qidi, but it worked on my old mk3s+ (with Revo Six).
One reason I want Revo on the Qidis: I want add a filament changer in the future. With a Revo 0.4mm standardflow nozzle you have less volumetric flow, but can unload filament and get a nice reloadable filament tip (using Prusas ramping profiles on unload). This speeds up filament changes a lot and reduces waste.
However, you still can print fast using the high-flow nozzle delivered with the Panda Revo.
If you want to add a filament sensor inside the hotend, look at the original I remixed. I do not use it.
A bowden coupler with m6 thead is needed to connect the reverse bowden.