1 / 8
DIY 3D-Printed Expansion with 4x 2.5" HDD Case for Soyo M4 Plus Mini PC — image 1
1 / 8

DIY 3D-Printed Expansion with 4x 2.5" HDD Case for Soyo M4 Plus Mini PC

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

3D-printed case for Soyo M4 Plus Mini PC with 4x 2.5" HDDs. Features 80 mm fan, ventilation, and monitoring.

Rating
0 / 5
Likes
7
Downloads
48
Makes
0
Views
1,050
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution — Noncommercial

This custom case for the Soyo M4 Plus Mini PC is designed for enthusiasts looking to expand the capabilities of their compact computer, transforming it into a powerful NAS, home server, or media center. The model supports the installation of up to four 2.5-inch HDDs, ensuring efficient cooling with an integrated Noctua NF-A8 PWM (80 mm) fan featuring a decorative orbital-pattern grille.  
The case boasts a two-tone design: a gray front panel made of PETG for durability and brown side panels made of PLA for an aesthetic touch. Thanks to its thoughtful design, you can monitor temperature and fan speed via an indicator on the rear cover. 

Key Features:  

Compatibility: Soyo M4 Plus Mini PC.  

Case Dimensions: 129x129x102 mm (with the original Soyo M4 Plus case: 129x129x141 mm).  

Materials: It is recommended to print the front panel with PETG for durability and heat resistance.  

Ventilation: Built-in grille for an 80 mm fan (Noctua NF-A8 PWM or any PWM (4-pin) 80 mm fan). Additional ventilation holes on the side and rear panels.  

Print Difficulty: Medium. Requires a printer with a minimum build volume of 130x130x130 mm.  

Print Time: Approximately 6 hours for all parts at a speed of 100 mm/s.  

Model Weight: Total weight of printed parts is approximately 200-300 g.


Required Components for Assembly:  


4x 2.5-inch HDD basket (from AliExpress).  

4 brass threaded inserts for M3x5x4 screws to secure the basket to the bottom plate.  

4 brass threaded inserts for M5x5x7 screws for the brown standoffs.  

2 XL4015 boards: one to reduce fan current to 0.1A, the other to power the HDDs (5V, 4A). You can use one board if the fan operates at 5V.  

2 12V 5.5x2.1mm DC connectors: one for power input (12V, 5A), the other for powering the mini PC.  

HDD power cable from AliExpress (cut off the unnecessary 12V and 3.3V wires).  

4 SATA cables (10 cm, from AliExpress).  

M.2 to 6-port SATA expansion adapter (from AliExpress).  

Fan speed control board (from AliExpress) with a temperature sensor (positioned near the SSD heatsink), 4 brass threaded inserts for M2*3*3.5 screws, and M2*12 screws.  

Phillips screwdriver (3-4 mm diameter, 100 mm length) for securing the standoffs to the factory case.  

Noctua NF-A8 PWM (80 mm) fan or any 4-pin 80 mm fan.


Assembly Instructions:  

  1. Drill 4 holes in the bottom of the HDD basket to match the M3*5*4 inserts (holes are already pre-modeled on the bottom plate) and cut off one side of the mounting bracket (look at the photo).  
  2. Install the M5*5*7 brass inserts into the columns.  
  3. Print the front and back panel with PETG (20% infill, 4 perimeters) and the side panels with PLA (15% infill).  
  4. Optionally, print the top panel to attach the XL4015 boards using double-sided tape, in this case, it should be mounted BEFORE the columns.  
  5. Clean the internal holes in the standoffs with a screwdriver if there is excess material after printing.  
  6. Install the fan in the front panel and connect it to the fan speed control board. Place the temperature sensor near the SSD heatsink and calibrate it if you needed.   
  7. Install the 2.5-inch HDDs into the basket and secure it to the bottom plate using M3 screws.  
  8. Connect the XL4015 boards: one for the fan (0.1A), the other for HDD power (5V, 4A).  
  9. Assemble all parts of the case, securing the standoffs to the factory case with a Phillips screwdriver.  
  10. Connect the SATA and power cables via the 12V 5.5x2.1mm DC connectors.
     

Printing Recommendations:  


Orientation

Print the front panel face down for better grille quality.  

Print Settings

Speed 100-120 mm/s, PETG temperature — 240°C (nozzle), 80°C (bed), PLA temperature — 220°C (nozzle), 60°C (bed).  

Notes

The only challenge may be cleaning the internal holes in the standoffs, but this is easily resolved with a screwdriver.
Additional Notes

Ensure your printer is calibrated for dimensional accuracy to avoid assembly issues. 

Ventilation holes on the side and rear panels provide additional airflow.


Why Try This Project?


This case is perfect for those looking to create a compact yet powerful data storage solution based on the Soyo M4 Plus. It combines functionality with a unique design, and 3D printing allows you to easily adapt the model to your needs. Make your mini PC not only functional but also a stylish addition to your workspace!  


Support the Author:


If you like this design, support me by buying me a coffee: Buy Me a Coffee.
If you have any questions, feel free to reach out!  
 


 

Tags