Counting matching models…
Update: Added 120mm fan version A revised version which enables 120mm case fans to be mounted as lid has been added. I ran this setup with a fan powered by the AK2 Plus board directly for over a week without any stability problems. Read…
DIY mini PC NAS DISCLAIMER: this model was built over the Beelink EQ12, however after some research I think it should also be compatible with the Beelink ser5. Hi Makers! I had some 2.5" HDDs laying around my lab gathering dust and I…
A 120mm fan mount for the “fanless” Topton N100 router PC. It lets you securely mount a fan without case modification.
Beelink Mini PC 12th Gen Intel Alder Lake N100 tried to keep it accurate to 0.02% mm
These are the 3D models in .STL, .3MF and .step format of the shoulder buttons for the Sony PSPGO (PSP-N1000) handheld console. The left shoulder button on my PSP GO broke and I could not find a replacement button. I modeled and printed…
(Print Settings Printer brand: Bambulabs Printer: Bambu P1P Rafts: No Supports: Yes Resolution: Nozzle 0.40mm / Layer Height 0.20mm Infill: Gyroid 25% Filament brand: AzureFilm Filament color: Neon Red Filament material: PLA Notes: print…
Right rack mount for Topton N100 i226-V Mini PC that takes only single 1U. One original bottom screw replaced with M3x40mm. Holds device in place. Printed from ABS with 0.2mm layer, 40% infill, 4 perimeters, 5 top/bottom layers. Design…
Designed for CWWK N100 “ Pioneer Affordable Edition ” Versions M4 Version for normal 120mm Fans, e.g. Noctua use M4x4,0 threaded inserts M2.5 Version for BeQuiet Silent Wings Fans use M2,5x4,0 threaded inserts Print at least with PETG as…
1U Rack Mount for Topton N5105 i226-V N150 N100 Mini PC
This is for mounting the fanless 'router' style Intel Alder Lake N100 mini PCs in a standard 5.25" drive bay (e.g. https://www.aliexpress.com/item/1005006036859811.html) In this case it is used for upgrading the HP N36L/N40L/N54L…
CWWK/Topton Affordable Edition Riser Base to accommodate 80x25mm fan at the bottom Combine with ZeroFlow's 120mm Top Fan mount for significant cooling benefits. Results: Stock fanless 48C 120mm Fan only 30C 120mm Fan and 80mm Fan 24C…
I needed to mount a fan on my “fanless” mini pc to keep it cool. As reported by the seller on Aliexpress , if you want to do more than just a router, you need to add a fan to dissipate the heat. The fan mount I've found was good but not…
Remodeled after the original LF-N1000 rear lens Cap for my Nikon 1 lenses. Prints without support, might have to remove some strings.
This is a two part cover for a DN110/DN100 ventilation-pipe. It is a very loose fit to accomodate for some soft sealing tape. You can fit a piece of fine insectscreen between the inner and the outer partr to prevent bugs from getting in…
This is a simple dock that mounts to the bottom of a generic Aliexpress N100 mini-PC and holds up to two 2.5" SSDs (or HDDs if you really want to). It mounts to the mini-PC with two M3x4mm or M3x6mm countersunk screws. The SSDs are then…
The original case of my Firebat AK2Plus MiniPC choked the SoC to death, so I stripped everything I did not need and started working on a case alternative. This is the first stage of this project, a minimalistic baseplate for the AK2Plus…
DN100/HT100 to DN50/HT50 adapter. Included a small spacer, if your DN100 port is not exactly 100mm. EDIT 16.02.2021 Reuploaded the files with better .stl's (more vertices). Now it's really a round thing! Category: Hobby
Printed in Clear PETG. Requires 1.5 rolls of filament. M3 16MM screws to assembly it. Cuttout for Pico PSU 4pin Mini-Fit-JR connector. Motherboard https://www.asrock.com/mb/Intel/N100M/ Pico PSU https://www.mini-box.com/picoPSU-160-XT…
Dieses Modell ist ein Update zu meinem vorherigen Abluftflansch . Die “Haken” beim alten Abluftflansch brechen leicht ab. In dieser Variante kommen ebenfalls wieder Magnet (Ø6x3) zum Einsatz. Diese sind abwechselnd eingeklebt, damit die…
Nach dem HT50-Set hier die vier anderen gängigen Nennweiten: DN32, DN40, DN75 und DN100. In jeder Größe der gleiche Teilesatz, insgesamt 44 Dateien.…
Reduction DN40 to DN100 (50mm to 110mm) ABS 2 wall Vytvořeno pro odvětrávání odpadu.
Infill: 100% Material: PETG Druckbetthaftung: innen+außen
I use Thread-Inserts M4 for the Fans Use tapping screws for fans to secure the adapter. Screw it onto the heatsink fins.
Allows you to hang a GMKte N100 Mini-PC on an IKEA Skadis pegboard. Use two M2 screws to attach the mount to the back of the PC (the holes are already there), and voila. I might have gone a little overboard with the pegs, but doesn't use…
An IKEA SKADIS mount for your mini-ITX motherboard. It's designed for the AsRock N100DC-ITX, but will most likely fit other boards, too. It's very sturdy , prints without supports and if parts are positioned as recommended, layers will be…
Lüftungsgitter DN100 Rohrinnenmaß 104mm Gedruckt in PLA
Simple bouchon à poser sur des évacuations en PVC DN100 pour éviter les odeurs sur les chantiers. Simple plug for use with DN100 PVC drains to prevent odors on construction sites. [BuyMeACoffee]( https://buymeacoffee.com/lafeeleonie )
I have designed a bracket for a PVC plastic gutter DN100 so that there are fewer disputes when feeding the chickens. Printed in PETG standard settings - nothing out of the ordinary. Easy to assemble and flexible in arrangement. German:…
Gedruck in PLA mit 0.4mm Nozzle auf modifizierten Ender 3. Die Druckzeit war 8,5h. FreeCAD Datei verfügbar. Im inneren ist ein rückwärts gerichteter Trichter. Das meiste Wasser läuft über die Außenwand zum Seitenrohr. Wenn das Gefäß am…
Created in TinkerCAD. If you want to edit it there, it's been made public: https://www.tinkercad.com/things/hkYeHfIrBWW-dreamfyre-dr06-mini-pc-case-top Because the fan of the CPU exhausts through the vent holes on this, PLA may be a poor…
A DN100 magnetic dust collection coupling for my planer. It consits of three parts. Part 3 has to be glued in part 1 to have a better alignment of the coupling. I used the following magnets:…
An easy to print DN100 Pipe Holder with a center distance of 120 mm. Fixated with 2x Ø4 screws.
This model is designed for the ASUS N100I-D mainboard inside the Jonsbo N2 case. It mounts directly onto the CPU heatsink and allows you to attach an additional 120mm fan. It's is also compatible with…
The bracket is suitable for the mini PC sold as “Topton pfSense Firewall Soft Router N6000 N5105 N100 4x i226-V 2.5G LAN NVMe Barebone Fanless Mini PC HDMI2.0 DP AES-NI OPNsense” on Aliexpress (as of Nov 2024). It replaces the base plate…
Created this cover which holds a 80mm fan at the bottom. This replaces the original cover and blows air right into the case, especially on the RAM and NVMe Disk. I'm using it with this stand: https://www.thingiverse.com/thing:6261436 I…
Dust collection adapter from an incoming 100 mm hose to two 40 mm hoses. I use this on my router table to connect both the fence and the router itself to my dustcollector. Works fine with @MariusHornberger 's hose clamps. You have to…
2U 10" Rack Mount Server Panel — Front I/O + Cooling Solution Custom-designed 2U rack mount panel for 10-inch server racks, bringing all essential I/O to the front for easy access. Built around a mini PC/SBC setup with front-facing power…
As part of the DIY Steam Machine craze, I decided to go another route. After much research inspired by other designs and on YouTube, this prototype build aims to be a home theater media PC (HTPC)/Moonlight game streaming, and a network…
Disclaimer vorne weg: Ich bin kein Experte für den Bau von Anlagen für kontrollierte Wohnraumbelüftung. Alles was ihr druckt und nachbaut macht ihr auf eigene Gefahr. Lüftungssysteme sollten regelmäßig überprüft und gereinigt werden.…
Holds a TRIGKEY G4 (N100) mini PC (calipered 115.9 x ~102 x 44.4 mm including feet) upright, logo out, with the front ports (2 x USB-A, power, button) facing DOWN through an open floor. The side walls and back plate are opened up so the…
Concept CAD collection for a DN100 PN40 trunnion-mounted ball valve with an ISO 5211 actuator interface. Includes the full assembly, cutaway, valve internals, and sphere/stem unit. STEP files are provided for CAD review and educational…
1U Rack Mount for Topton N5105 i226-V N150 N100 Mini PC
This model is designed for the ASUS N100I-D mainboard inside the Jonsbo N2 case. It mounts directly onto the CPU heatsink and allows you to attach an additional 120mm fan. It's is also compatible with…
An IKEA SKADIS mount for your mini-ITX motherboard. It's designed for the AsRock N100DC-ITX, but will most likely fit other boards, too. It's very sturdy , prints without supports and if parts are positioned as recommended, layers will be…
2U 10" Rack Mount Server Panel — Front I/O + Cooling Solution Custom-designed 2U rack mount panel for 10-inch server racks, bringing all essential I/O to the front for easy access. Built around a mini PC/SBC setup with front-facing power…
This is a three-part print that lets you mount an 80mm fan below, and a 120mm fan above, your new Topton N100 "fanless" pc that you just bought only to discover that it overheats and/or burns your fingers. If you haven't bought one of…
Suggested printing in the provided orientation with auto tree supports. Yes, that orientation. You could print it flat (you'd still needs supports), but then layer lines could cause the pegboard “legs” to break off. Use M3 SHCS or BHCS to…
Welcome to my first model in the Printables Store. My model is a leaf separator that filters your rainwater and serves you the leaves in a bucket. Once installed, you don't have to worry about anything else. After 1,5 years of testing I…
A 120mm fan shroud to replace the piddly wee fan on the Topton N100 ITX board. I mean the tiny fan does an excellent job as it is, but you can only have a 3d printer for so long before you have to print upgrades. You will need 4x M2.5…
this is a laptop and it is quite productive because instead of Raspberry Pi there is a mini-PC with N100 what you will need: display:…
Motherboard: Aliexpress link #1 Aliexpress link #2 Intel N100 (4 cores, up to 3.4GHz, 6W TDP) 1xDDR5 4800MHz, up to 16GB M2 2280 for NVME SSD (PCIe 3.0 x1) MiniPCI for Wi-Fi/BT modules Two USB3.2 Gen2 + one USB2 + up to 4 USB2.0 from…
This is the IO shield for Topton NAS motherboard N100, 2x2.5G and 1x10G from Aliexpress. The shield partially covers the HDMI/DisplayPort but does not block it.
This is a guide for making a hole in the top of the minipc box, to allow airflow. Use the f360 file if you need a different size hole. This is the dimensions of the Forstner drill bit i used and the shaft of it. change it to fit your…
I designed this model as a spare, since I broke the original. print in petg for food use, if possible coat it with resin
Wenn ich an meiner MPCNC Primo den Laser benutze sauge ich den Rauch mit einem Rohrventilator ab und lasse ihn durchs Fenster raus. Der Rohrventilator ist fest an der Decke angebracht. Damit ich die Schläuche nicht herumhängen habe, wenn…
Remix by below project: https://github.com/thunder439/QNASMINI modify item: 1.Case & mid frame , add hign for N100 MB cooling fan 2.Modify MB IO port for N100 MB you need prepare 8010 fan for N100 MB and 暢網 N100 MB as photo Category:…
Replacement IO Brackets Cutout for fan cable Mounting points for zip ties RS232 Includes a protective raised ring around the power button to prevent accidental shutdown. Print in temperature resistant material as a caution. Used in…
Bought this Topton Mini PC from Aliexpress: https://www.aliexpress.com/item/1005004360072281.html Temperatures were higher than expected. CPU needed a shim. If using an NVME drive, it will generate more heat than the CPU. Remade the…
![Alternative Case for AK2 Plus Intel N100 Mini PC (Firebat, Kamrui, NiPoGi) [Updated 120mm Fan Version]](https://media.printables.com/media/prints/926938/images/7229417_abf8bd94-445d-400a-9f74-0e1abaf2ebbb_0b6333b6-85d1-470d-b564-e040aaa0a8b8/ak2-plus_case_120mm_main.jpg)
