SKÅDIS pocket for TRIGKEY G4 (N100) mini PC
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Upright pocket for the TRIGKEY G4 N100 mini PC on IKEA SKÅDIS. Front ports face down, vents stay open.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 17
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Holds a TRIGKEY G4 (N100) mini PC (calipered 115.9 x ~102 x 44.4 mm including feet) upright, logo out, with the front ports (2 x USB-A, power, button) facing DOWN through an open floor. The side walls and back plate are opened up so the side vents and the base can breathe. A sprung bump in the back pushes it onto the front lips: snug, no rattle.
It runs my Proxmox / Home Assistant box. Hangs on 2 hook bars (included). Print upside down (open top on the bed), no supports.
Print settings: PETG, 0.2 mm layers, 4 walls, 25% gyroid, no supports.
Editable OpenSCAD source: https://github.com/PrimroseHA/skadis-network-mounts
Other parts in my SKÅDIS network rack:
Hook bars (start here): https://www.printables.com/model/1866142
TP-Link Omada POE380S injector: https://www.printables.com/model/1866145
TP-Link TL-SG1024D 24-port switch: https://www.printables.com/model/1866147
Heatmiser neoHub v2: https://www.printables.com/model/1866148
Samsung SmartThings Hub v3: https://www.printables.com/model/1866154
Lightwave Link Plus L2: https://www.printables.com/model/1866155
2 x UGREEN 2.5" SSD enclosures: https://www.printables.com/model/1866157
Sonoff ZBDongle-E Zigbee dongle: https://www.printables.com/model/1866160
Wall spacers and caps: https://www.printables.com/model/1866187