SKÅDIS pocket for TRIGKEY G4 (N100) mini PC
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Upright pocket for the TRIGKEY G4 N100 mini PC on IKEA SKÅDIS. Front ports face down, vents stay open.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 17
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Holds a TRIGKEY G4 (N100) mini PC (calipered 115.9 x ~102 x 44.4 mm including feet) upright, logo out, with the front ports (2 x USB-A, power, button) facing DOWN through an open floor. The side walls and back plate are opened up so the side vents and the base can breathe. A sprung bump in the back pushes it onto the front lips: snug, no rattle.
It runs my Proxmox / Home Assistant box. Hangs on 2 hook bars (included). Print upside down (open top on the bed), no supports.
Print settings: PETG, 0.2 mm layers, 4 walls, 25% gyroid, no supports.
Editable OpenSCAD source: https://github.com/PrimroseHA/skadis-network-mounts
Other parts in my SKÅDIS network rack:
Hook bars (start here): https://www.printables.com/model/1866142
TP-Link Omada POE380S injector: https://www.printables.com/model/1866145
TP-Link TL-SG1024D 24-port switch: https://www.printables.com/model/1866147
Heatmiser neoHub v2: https://www.printables.com/model/1866148
Samsung SmartThings Hub v3: https://www.printables.com/model/1866154
Lightwave Link Plus L2: https://www.printables.com/model/1866155
2 x UGREEN 2.5" SSD enclosures: https://www.printables.com/model/1866157
Sonoff ZBDongle-E Zigbee dongle: https://www.printables.com/model/1866160
Wall spacers and caps: https://www.printables.com/model/1866187