1 / 1
laser head with air pressure and smoke extract — image 1

laser head with air pressure and smoke extract

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

laser head for atomstack a5 m50 pro

Rating
0 / 5
Likes
1
Downloads
10
Makes
0
Views
78
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial — Share Alike

Assembly for the head of the laser engraver. You will need TPU plastic or silicone for sealing, 4 screws m3x8, a quick-release connector for a hose with a diameter of 4mm. air hose 4mmx2mm length 2m, air compressor. something for drawing air (I made a homemade mini turbine for this), as a hose for removing smoke I used a flexible cable channel with an outer diameter of 25mm (keep in mind this is not a good option because it can create a strong whistle, use a turbine with speed control I took a turbine from Aliexpress for 12v, my normal operating mode was at a voltage of 7v and consumption of 1.5A.) You also need to put some spacers or on the ends because the sizes are tight. I replaced the standard buttons with KW4-3Z-3 (L15)
I recommend for assembly, high efficiency of smoke absorption.

Tags