Lightweight bike acessory handlebar mount ⌀ 22 mm PETG
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A handlebar mount for lightweight bicycle accessories. Handlebar ⌀ = 22 mm. What kind of applications? See description.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 7
- Makes
- 0
- Views
- 116
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
I bought a stylus to enter directions on my phone while biking with gloves on. This is mostly useful in the winter.
I didn’t like the original double-sided tape mount, so I designed a simple 3D-printed handlebar mount instead.
It snaps onto a 22 mm handlebar tube and is secured with a zip tie. Precision isn’t critical, so a slightly loose fit is fine.
I've published two variants:
• One with a flat surface for gluing lightweight accessories. (sand the surface before using glue)
• One specifically for a 9 mm diameter stylus.
Print material: PETG
Print settings: 50% infill, gyroid pattern, tree/organic supports touching build plate
Print time: 45–60 min (including raft with no top layers)
