Lilygo T5 4.7 epaper display case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I needed a case for my e-ink weather display project using a Lilygo T5 4.7" ESP32+Epaper and wasn't satisfied with the…
- Rating
- 3 / 5
- Likes
- 8
- Downloads
- 111
- Makes
- 1
- Views
- 2,236
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
I needed a case for my e-ink weather display project using a Lilygo T5 4.7" ESP32+Epaper and wasn't satisfied with the ones I found online so I made my own.
Main features:
- single (reset) button integrated to the frame
- optional back cover to protect from dust
- easy to print and setup, only one part if you don't print the back cover
- Source blender file available at https://github.com/fdev31/LilygoT5-weather-photo-display
Print Settings
Printer:
wanhao duplicator + E3DV6 + Rearm
Rafts:
No
Supports:
No
Resolution:
200
Infill:
20
Filament:
doesn't matter PLA
bronze
Notes:
You may need a think knife or a cutter to detach the button from the rest of the frame, allowing it to bend flawlessly.
The back cover is a bit a pain to install "right", some rework could improve it.
Just make the upper part ideally flushed and then press on the sides to follow rounded shape and gently "clip" the back plate.
Category: DIY