1 / 4
Core One Top Cover with Hinges - Remix for 10x2mm Magnets — image 1
1 / 4

Core One Top Cover with Hinges - Remix for 10x2mm Magnets

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Remixed to work with 10x2mm magnets

Rating
5 / 5
Likes
31
Downloads
122
Makes
2
Views
1,105
Reviews
2

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Wanted to use this rear frame part remix along with the main parts from the original model, but I didn't have any 5x5mm magnets on hand. I remixed it to work with some spare 10x2mm magnets I had laying around.

Parts: 

  • (2x) 10x2mm Magnets - From this magnet kit
  • (2x) M3x25mm Button Head Screws
  • (2x) M3 Nuts 
  • (2x) M3x10mm Button Head 
  • (2x) M3 Nyloc Nuts

Print Settings: 

  • Print part with text side up
  • Material: PETG or ASA
  • Nozzle: 0.4mm
  • Layer: 0.20mm Structural
  • Infill: 15% Gyroid
  • Walls: 3
  • Supports: Build plate only - I set ‘Top contact Z distance’ to 0.25 for easier support removal with PETG

Assembly Instructions:  

  1. Push both 10x2mm magnets in
  2. Install rear frame bar per original instructions
  3. I used a longer M3x50mm screw to help pull in the regular M3 nuts into the body hinge part since the pockets for them are relatively tight. Easier to do that now than later when the hinges are already on the Core One body. 
  4. Thread M3x10mm screws through the Body Hinges parts and into the Core One.
  5. Thread M3x25 screws through both hinge parts, don't tighten all the way yet. 
  6. With both parts lined up and in position, thread both M3 Nyloc nuts to the M3x10mm screws. 
  7. Tighten the M3x10mm screws.
  8. Tighten the M3x25 screws - Tightness level will vary on how smoothly the lid will open/close.

Tags