Nominal Focal Length Gauge Block for Laser Cutters
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Use to get a close starting point to further adjust focal length for surface and depth cuts for three different lenses.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 16
- Makes
- 0
- Views
- 125
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
Used for both practical and educational purposes, this gauge block can be used to get a close starting point to further adjust focal length for both surface and depth cuts for three different lenses.
The three lenses are:
- 1.5 inch or 38.1 mm focal length
- 2.0 inch or 50.4 mm focal length
- 2.5 inch or 63.5 mm focal length
Each square on the block is labeled with the applicable lens focal length and whether it is used for surface cuts or depth cuts. Therefore, there are six squares on the block..one for surface and one for depth for each lens. The surface cuts represent the placement for the most precise surface engraving. The depth cuts represent the placement for maximum depth cutting based on general rules-of-thumb recommendations for that particular lens.
This block measures the focal length which for a given lens is the distance from the lens to the point where the light rays converge. When using this block ensure that the distance is measured from the lens itself to the surface of the object.
***NOTE: Each square on the block only provides a NOMINAL starting point. Further adjustment will be needed for line thickness optimization and different materials.
Disclaimer: The usefulness of this item will vary based on the particular laser cutting machine and has not been tested in practice :-) However, it can also be used as an educational tool for laser engraver / cutter optics.
Enjoy!