Annex Carabiner Hotend Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount for an Annex Carabiner toolhead PCB. Mounts to toolhead using Manta Mk2 rear plate and Sherpa Mini.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 10
- Makes
- 0
- Views
- 441
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
This is a mount (marked yellow in images) for an Annex Engineering Carabiner to mount onto a Creality (Ender 5) hotend. The mount uses mounting holes of the Manta MK2 Rear_Mounting_Plate_E5 (credit to BoothyBoothy, blue in images), as well as the lower two screw holes of the Sherpa Mini, where longer than default screws are required.
To fix the PCB to the mount, the lower left hole takes a heat insert, while the upper right (due to clearance) takes an M3 nut - I recommend super-gluing it in place so it doesn't fall out during screwing in.