Round Yoga Table

A user here in printables requested, if I'm able to make my “Side Table Couch Table Coffee Table” as a round version.

Approximately 350mm, and printable on a BambuLab X1C. So i devided it in 4 parts.

Features:

• Used Honeycomb infill as design element and also saving filament (looking forward to see other nice combinations) 
• Wooden dowel as design element 
• self aligning connection methods
• holes for connecting zip ties to fix everything together

Table plate:
Diameter: 350mm

Required Materials:

• 3x wooden dowels (choose as long as you need)
  • https://www.sonderpreis-baumarkt.de/renovieren-und-wohnen/buerobedarf/bastel-und-kuenstlerbedarf/rundstab-buche-1000-mm-oe-30-mm
  • was the cheapest store where i got it
• nice looking filament
  • i used CR3D ABS Carbon https://www.cr3d.de/produkt/abs-carbon/
  • matt and very clean look
• 8x small zip ties for connecting the single parts

Printing / Settings:

i used prusaslicer for slicing

General:

• Printed with an 0.6mm Nozzle for a nice 3d printing look
• 0.4mm Layerheight

Plate Parts:

• 4 Wall Lines
• 15% Honeycomb Infill 
• 0 Bottom and 0 Top Layers

Connector Parts:

• 2 Wall Lines
• 15% Honeycomb Infill 
• 3 Bottom and 3 Top Layers

Base parts:

• 4 Wall Lines
• 15% Honeycomb Infill 
• 0 Bottom and 3 Top Layers
• Support on

Building instruction:

1.Push the three wooden dowel inside of the printed base part.

2. Connect 2 of the plate parts to 2 parts. Afterwards you can slide them on the base part.

3. Tight them with the zip ties and cut the ends.

4. You almost reached the end. Take the table, place it on its legs and search a nice place for it :)

11. Make a photo of your couch table and post a make. I would be happy to see your work :)

Feel free to contact me or write an comment here if you have questions, wishes or something else.

Happy making.